...
- Fiberglass
- 1/4" plywood
- West Systems epoxy (6 or 24-hour)
- 5-minute epoxy
- Squeegees
- Rollers
- Phenolic tube
- Release film
- Bleeder fabric
- Vacuum bag
- Peel ply
- Spray glue
- Scissors
- Sandpaper
- Wax paper
...
Flight Fin Can Procedure
Required Materials-
- Mylar (for initial layup over tube)
...
- Phenolic tube
...
- Carbon fiber (5.7 oz, 2x2 twill/plain weave)
...
- Wax paper
...
- Spray glue
...
- Epoxy (6 or 24 hour for root bond, not oven cure)
-squeegees
-rollers
- Laminating epoxy (24 hour) if oven curing
...
- Boats for epoxy
- Squeegees
- Rollers
- 1/8"
...
- sheet of G10
- 1/4"
...
- sheet of phenolic
- Mandrel
- Proline
- Popsicle sticks (large and small)
- Fillet tool (3D printed?)
Bagging materials - Peel ply
- Bleeder fabric
- Release film
- Vacuum bag
- Vacuum tape
-15deg end mill (LOOK INTO THIS, talk to ethan)
...
-15deg end mill (LOOK INTO THIS, talk to ethan)
-Mandrel
-Bagging materials (peel ply, bleeder fabric, release film, vacuum bag and vacuum tape)
-ppl with respirators
-proline (for root filler)
-little popsicle sticks
-big popsible sticks
-3D printed fillet tool
-boats for epoxy
Preparation:
FIT PHENOLIC OVER MOTOR TUBE
...