...
- Request Server Ops setup the standard system user configuration on this system. This will include groups and system users for logs, www, and db.
- Download the following software from the ISDA software repository onto the system being configured:
Code Block httpd-2.2.4.tar.gz php-5.2.3.tar.gz MySQL/MySQL-*community-5.0.45-0.rhel4.i386.rpm MySQL/my.cnf mod_authz_mitgroup/mod_authz_mitgroup_rhel4.c apache_home.sh web
- If this is a RHEL 5 system, use the native Apache and PHP installs. Link the config directories into place. Download these additional RPMs.
Code Block mkdir /home/www/apache-2.2.3 ln -s /home/www/apache-2.2.3 /home/www/apache scp -r root@trogdor:/opt/software-repository-tmp/Apache/config-files/conf \ root@trogdor:/opt/software-repository-tmp/Apache/config-files/logs \ root@trogdor:/opt/software-repository-tmp/Apache/config-files/htdocs \ root@trogdor:/opt/software-repository-tmp/Apache/config-files/icons \ root@trogdor:/opt/software-repository-tmp/Apache/config-files/man* \ /home/www/apache chown -R www:www /home/www mv /etc/httpd /etc/httpd.bak ln -s /home/www/apache /etc/httpd ln -s /usr/lib64/httpd/modules /home/www/apache/modules
- If this is a RHEL 5 system, use the native Apache and PHP installs. Link the config directories into place. Download these additional RPMs.
- If the current version of MySQL is below 5.0, or if MySQL is not installed, update it to a recent version.
- Download the needed packages for RHEL 4 or 5.
- RHEL 5
Code Block mkdir /home/db/tmp cd /home/db/tmp scp root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-client-community-5.0.45-0.rhel5.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-server-community-5.0.45-0.rhel5.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-shared-community-5.0.45-0.rhel5.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-shared-compat-5.0.45-0.rhel5.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-test-community-5.0.45-0.rhel5.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/perl-DBI-1.52-1.fc6.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/my.cnf \ /home/db/tmp
- RHEL 4
Code Block mkdir /home/db/tmp cd /home/db/tmp scp root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-client-community-5.0.45-0.rhel4.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-server-community-5.0.45-0.rhel4.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-shared-community-5.0.45-0.rhel4.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-shared-compat-5.0.45-0.rhel4.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/MySQL-test-community-5.0.45-0.rhel4.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/perl-DBI-1.52-1.fc6.i386.rpm \ root@trogdor:/opt/software-repository-tmp/MySQL/my.cnf \ /home/db/tmp
- RHEL 5
- Stop the MySQL server if it is running, remove the old version, and install the new one.
- RHEL 4
Code Block /etc/init.d/mysql stop rpm \-ev cyrus-sasl-sql-2.1.19-5.EL4.i386 rpm \-ev dovecot-0.99.11-4.EL4.i386 rpm \-ev mysql-4.1.20-1.RHEL4.1.i386 rpm \-ev mysqlclient10-3.23.58-4.RHEL4.1.i386 rpm \-ivh MySQL-client-community-5.0.45-0.rhel4.i386.rpm rpm \-ivh MySQL-test-community-5.0.45-0.rhel4.i386.rpm rpm \-ivh MySQL-devel-community-5.0.45-0.rhel4.i386.rpm rpm \-ivh MySQL-server-community-5.0.45-0.rhel4.i386.rpm
- RHEL 5
Code Block /etc/init.d/mysql stop rpm \-ev cyrus-sasl-sql-2.1.19-5.EL4.i386 rpm \-ev dovecot-0.99.11-4.EL4.i386 rpm \-ev mysql-4.1.20-1.RHEL4.1.i386 rpm \-ev mysqlclient10-3.23.58-4.RHEL4.1.i386 rpm \-ivh perl-DBI-1.52-1.fc6.i386.rpm rpm \-ivh MySQL-client-community-5.0.45-0.rhel5.i386.rpm rpm \-ivh MySQL-test-community-5.0.45-0.rhel5.i386.rpm rpm \-ivh MySQL-devel-community-5.0.45-0.rhel5.i386.rpm rpm \-ivh MySQL-server-community-5.0.45-0.rhel5.i386.rpm
- RHEL 4
- Download the needed packages for RHEL 4 or 5.
- Stop the MySQL server and reconfigure my.cnf. The MySQL server startups as part of the rpm install process.
Code Block /etc/init.d/mysql stop mv /var/lib/mysql /home/db chown \-R db:db /home/db cd /etc/ cp /root/my.cnf . /etc/init.d/mysql start
- Be certain to use the my.cnf file from the ISDA software repository, as it sets the database user to be 'db' (and not the default 'mysql'), and put the home and data directories into /home/db.
- Install OpenSSL and setup certificates.
- If the version of OpenSSL is greater the 0.9.8, skip the install step.
Code Block openssl version
- Install OpenSSL, if needed.
Code Block mkdir /home/www/tmp cd /home/www/tmp tar \-xzvf /root/openssl-0.9.8a.tar.gz cd openssl-0.9.8a ./config \--prefix=/home/www/ssl \--openssldir=/home/www/ssl make make install
- If the version of OpenSSL is greater the 0.9.8, skip the install step.
- Setup certificates
- get the mitca at http://ca.mit.edu/mitClient.crt and save it as /usrhome/localwww/ssl/certs/mitClient.crt
- convert mitCA.crt to pem format:
Code Block openssl x509 \-in /home/www/ssl/certs/mitClient.crt \-inform DER \-outform PEM \-out /home/www/ssl/certs/mitCA.pem
- Generate rsa key. This simply generates some random stuff:
Code Block ps > /tmp/foo ps \-elf >> /tmp/foo openssl genrsa \-rand /tmp/foo 1024 >/home/www/ssl/private/`hostname`-key.pem
- Generate request for a certificatecd /home/www/ssl/bin
send the file /usr/local/ssl/certs/`hostname`-req.pem to mitcert@mit.edu,Code Block openssl req \-key /home/www/ssl/private/`hostname`-key.pem \-new \ >/home/www/ssl/certs/`hostname`-req.pem
- Please be aware, the organization (O) is Massachusetts Institute of Technology and the common name (CN) is the name of the server or service, including the domain name (.mit.edu). Also, some servers, such as Thalia servers, can represent an entire subdomain. These servers will need certificates issued with a wildcard in the domain name, such as *.isda-thalia-1.mit.edu.
Wiki Markup Remember, if the server is a Thalia server, if will need a wildcard certificate and DNS record for \*.\[hostname\], and if it is doing any type of authentication, it will need a joint client/server certificate to be able to connect to the Shibboleth server (and have end users connect to it as well).
- To generate a self signed temporary certificate, add the x509 and nodes options to the openssl command line.
Code Block cd /home/www/ssl/bin openssl req \-key /home/www/ssl/private/`hostname`-key.pem \-new \ \-x509 \-nodes >/home/www/ssl/certs/`hostname`-temp.cert
- When you receive a certificate from MIT Certificates, save it as /home/www/ssl/certs/`hostname`-cert.pem
- to look at a request:
Code Block openssl req \-in ./req.pem \-text
- to look at the private key:
Code Block openssl rsa \-in /home/www/ssl/private/`hostname`-key.pem \-text
- to look at the server certificate:
Code Block openssl x509 \-in /home/www/ssl/certs/`hostname`-cert.pem \-text
- to look at a request:
- Install Apache. If you are using RHEL 5, skip this step.
Code Block cd /home/www/tmp tar \-xzvf /root/httpd-2.2.4.tar.gz cd httpd-2.2.4 ./configure \--prefix=/home/www/apache-2.2.4 \--enable-ssl \ \--with-ssl=/home/www/ssl \ \--enable-modules="most mod_rewrite" \--enable-so make make install ln \-s /home/www/apache-2.2.4 /home/www/apache
- Set up PHP. If you are using RHEL 5, skip this step.
Code Block cd /home/www/tmp tar \-xzvf /root/php-5.2.3.tar.gz cd php-5.2.3 ./configure \--with-mysql \--with-kerberos=/usr/kerberos \--prefix=/home/www/php-5.2.0 \--with-apxs2=/home/www/apache-2.2.4/bin/apxs \ \--enable-fastcgi \--enable-magic-quotes \--with-openssl \--with-mysql-sock=/home/db/mysql/mysql.sock \--with-mysqli \--enable-sockets \--enable-soap \ \--with-openssl-dir=/home/www/ssl \--with-pear=/usr/share/pear make make install ln \-s php-5.2.0 php
- Configure Apache
- edit /home/www/apache/conf/httpd.conf
- edit the following directives:
Code Block ServerRoot "/home/www/apache" # change to apache home directory User www # change from daemon Group www # change from daemon Include conf/extra/httpd-vhosts.conf # Uncomment Include conf/extra/httpd-ssl.conf # Uncomment
- add to /home/www/apache/conf/httpd.conf, and the bottom of the other includes:
Code Block # PHP module includes LoadModule php5_module modules/libphp5.so AddHandler php5-script .php AddType text/html .php DirectoryIndex index.php \#AddType application/x-httpd-php-source .phps
- edit the following directives:
- edit /home/www/apache/conf/extra/httpd-vhosts.conf to have ONLY one of the following VirtualHost blocks:
Code Block <VirtualHost \*:80> RewriteEngine On RewriteRule \^/(.*) [https://finniganfen.mit.edu/$1] [L,R] </VirtualHost>
- To prevent some web pages from being redirected to https, add an escape clause between "RewriteEngine On" and the RewriteRule:
Code Block RewriteCond % {REQUEST_URI} \!/WarehouseService
- To prevent some web pages from being redirected to https, add an escape clause between "RewriteEngine On" and the RewriteRule:
- edit /home/www/apache/conf/extra/httpd-ssl.conf and alter the following directives:
Code Block # points to directory for static html files DocumentRoot "/home/www/apache/htdocs" # the servername of the server ServerName gybe.mit.edu:443 # the admins of this server ServerAdmin map-support@mit.edu # error log file ErrorLog /home/www/apache/logs/error_log # access log file TransferLog /home/www/apache/logs/access_log # public server certificate SSLCertificateFile /usr/local/ssl/certs/gybe.mit.edu.pem # private server certificate SSLCertificateKeyFile /usr/local/ssl/private/https-key.pem \#certificate path SSLCACertificatePath /usr/local/ssl/certs # certificate authority key SSLCACertificateFile /usr/local/ssl/certs/mitCA.pem SSLVerifyClient require SSLVerifyDepth 10
- Set the allow and deny line for "<Directory />" section from "Deny from all" to "Allow from all" if you are testing the SSL configuration.
- add the following after the '<Directory "/home/www/apache/cgi-bin">' block in /home/www/apache/conf/extras/httpd-ssl.conf
Code Block SSLOptions \+StdEnvVars \+ExportCertData
- edit /home/www/apache/conf/httpd.conf
- Setup the home and init scripts, and link them into runlevels
Code Block cp /root/apache_home.sh /etc/profile.d/ chmod a+rx,a-w /etc/profile.d/apache_home.sh
- edit the variables in the top section of the web file to use the directories and binaries correct for this system
- be certain to check if apache is using a httpdctl or apachectl starter program, usually contained in /home/www/apache/bin, and set the apachectl variable accordingly
- set web to be executable
Code Block chmod a+rx,a-w /etc/init.d/web
- link startweb and stopweb to the web program, from wherever it is located, and link start scripts in /etc/init.d:
Code Block ln \-s /etc/init.d/web /root/startweb ln \-s /etc/init.d/web /root/stopweb ln \-s /etc/init.d/web /etc/rc.d/rc1.d/K15web ln \-s /etc/init.d/web /etc/rc.d/rc2.d/K15web ln \-s /etc/init.d/web /etc/rc.d/rc3.d/K15web ln \-s /etc/init.d/web /etc/rc.d/rc4.d/K15web ln \-s /etc/init.d/web /etc/rc.d/rc5.d/K15web ln \-s /etc/init.d/web /etc/rc.d/rc6.d/K15web ln \-s /etc/init.d/web /etc/rc.d/rc2.d/S15web ln \-s /etc/init.d/web /etc/rc.d/rc3.d/S15web ln \-s /etc/init.d/web /etc/rc.d/rc4.d/S15web ln \-s /etc/init.d/web /etc/rc.d/rc5.d/S15web
- update paths in /etc/profile, by adding the following line in the path manipulation code block (you can find it by searching for /usr/local/sbin)
Code Block pathmunge /usr/local/bin pathmunge /usr/kerberos/bin
- To start and stop tomcat and apache, use the initialization scripts in /etc/init.d. Be certain to leave them running when you are finished.
- starting
Code Block /etc/init.d/web start
- stopping
Code Block /etc/init.d/web stop
- starting