Page History

Before beginning, ensure you are properly connected to the MIT network.

1. Navigate to crestaff.mit.edu in your preferred browser.
2. On the menu on the left hand side, scroll to Information Technology and click the arrow to access the dropdown menu. Then, click on Software.
   Image Added
3. Click on the Dropbox link on the Software page. If you cannot reach Dropbox this way, try using a different browser.
4. Select the Printer Drivers folder in Dropbox and download the drivers for Windows.
   Image Added
   Image Added
5. Navigate to the downloaded .zip in your files and extract it using 7-Zip (right-click > 7-Zip > Extract Here).
   Image Added
6. Open extracted folder (most-likely called Driver) and run Setup64 application.
7. Agree to the software end user license agreement, then select Install printers/MFPs.
8. Do not allow the installer to search for printers/MFPs. After clicking cancel, select Specify manually.
   Image Added
9. In Network, select IPv4, IPv6 address/IP Host name.
10. In this field, type 'msred-copier.mit.edu', then click Next.
    Image Added
11. From the dropdown menu, select Konica Minolta C368Series, then click Next.
12. Click Install.
13. After the installation has completed, try printing a test page. If the test page prints normally, the device is functioning normally; no further action is required.
14. If the test page does not print, open your computer's control panel.
    Image Added
15. Navigate to your hardware devices and find the printer ()
    Image Added
    Image Added
16. Right click on the device and choose printer properties (note that this is not the same as properties).
17. Select the Ports tab.
    Image Added
18. Click Configure Port...
    Image Added
19. Ensure that SNMP Status is disabled.
    Image Added
20. If problems persist, contact IT personnel at creit@mit.edu.

...