Introduction
This section is under construction!
The CRE has one main multi-function copier/printer/scanner, located across from the coffee maker.
[Insert photo of printer here]
Self-Installation Instructions
To properly print documents with your Windows or Mac computer, some setup is required. The following resources are available to assist you in installing the printer to your device.Please follow the instructions for your device below:
| Page Tree | ||||||
|---|---|---|---|---|---|---|
|
Guided Installation Instructions
Call Conway Technologies at (603) 889-8563, option 1, option 1.
Tell them you need the CRE copier installed on your device. The Equipment Tag Number is TH548.
A Conway technician will return your call and remote into your computer to add the printer. If asked, inform them the IP address of the printer is msred-copier.mit.edu
You will need to know the administrator password for your computer (Your administrator password is the password you type in to install software on your computer or change system settings).
You need to be on-campus when they install the printer and be connected to the MIT Secure wireless network; or you must be connected to the MIT VPN.
If you have any issues, contact CRE IT Service Desk at creit@mit.edu or (617) 715-4111.
Tips
- In order to print, you must be connected to the MIT network using one of the following methods:
- Connected to the MIT SECURE or MIT wireless network
- Connected to a wall jack using an Ethernet cable
- Connected to the GlobalProtect VPN