Page History

Here, we'll test ProjectX on a three-dimensional hemisphere in compressible, inviscid flow (running in serial).

The solution, here, is not restarted. That is, the input file is a grid consisting of ### elements. A ###-order solution is then computed...

For more information, please consult the .job and .hist files located in the corner of each panel.

Listed below are the tolerances for the relevant data compared in the history files:

• Common flow parameters:
  • Equation set: Compressible 3D Euler
  • Flux type: Roe
  • Freestream Mach number: M _∞ = 0.5
  • Angle of attack: α = 0 °
  • Initial CFL: 1
• Solver parameters:
  • Nonlinear solver:
    • Solver: Newton
    • Convergence criterion: 100 iterations or
      Residual norm < 10^-12^
    • Under-relaxation factor: 1.0
  • Linear solver:
    • Preconditioner: Jacobi (applied to the left)
    • Reordering type: Minimum discarded fill (MDF)
    • Outer GMRES iterations (no. restarts): 20
    • Inner GMRES iterations (no. Krylov vectors): 200
  • Solution order: 2
  • PSequencing: False

Density across Z-planes after two adaptations