...
Note about CPS usage. Since CPS now compute and send the 2D speed to cars, AndreaCPS is not compatible to previous ca2 versions. Viceversa my ca2 is not compatible with previous version of CPS. This is because the communication protocol between CPS and ca2 is now a little bit different. In general I would suggest using AndreaCPS instead of KevinCPS or LeoCPS. This because of the bug that involved the initial target detection. I did not check CPS versions that are previous to KevinCPS but it is likely that those versions do not have this bug since computer 1 and 2 do not send their information to computer 0 before sending them to cars.
CURRENT LAB PROBLEMS
- Motor of car 2 does not work.
- Cars steers are slightly biased. This is very evident in car 1. When the steer input signal is 0 they turn left.
- Cameras should be screwd to the metal support. Now everytime they move, the calibration must be done again. An extrinsic calibration (at least) should probably be performed again after this job.
- Sometimes the two chargers close to the whiteboard display the green light when cars are connected (i.e. they're done charging) but when I move the wires the light turns red.
...