Page History

...

This activity is listed as:

...

The process  to receive approval for this tool isTo start the process, please:

1. Check below to see that your use falls within guidelines
2. Complete, sign, and submit the MIT 

   Excerpt Include
   Remote Making Risk Acknowledgement Remote Making Risk Acknowledgement nopanel true

3. Complete and submit the 

   Excerpt Include
   Remote Making Checklist Remote Making Checklist nopanel true

    for this tool
4. If the checklistContact us to discuss your plan and use mit-making-at-home@mit.edu:
   
   1. Directs you to complete other requirements, do not proceed, we will contact you to discuss
   2. Does not require training or indicate other unfulfilled requirements, you may use the tool

Minimum required PPE and precautions (more may be required based on circumstance)

Most important safety considerations (issues, resources, advice, warnings)

• Use on foams that have been approved for hot cutting in areas with adequate ventilation

  • OK to cut: polystyrene, polyethylene, EVA

  • Not OK to cut: polyurethane, polyisocyanurate

• Adequate ventilation is satisfied if using

  • Outdoors: in a wide open space (not in a shed)

  • Indoors: with an adequate active exhaust system (
paint booth,
• • fume hood, fans, and windows that provide cross flow ventilation)
.
• • ;
    Note: DO NOT USE in indoor spaces that may contain flammable materials or flammable residue, such as paint booths or auto garages, even if ventilation is present

• If you must cut indoors, contact us (mit-makingremote-at-home@mitmaking@mit.edu) and we can advise on ventilation

...

Forms and contact information required to obtain approval to use this technology/tools

• Link: 

  Excerpt Include
  Remote Making Risk Acknowledgement Remote Making Risk Acknowledgement nopanel true

• Link: 

  Excerpt Include
  Remote Making Checklist Remote Making Checklist nopanel true

• Email: 
• Compliance Checklist Submission Form (link)
• Q&A and Discussion (email) to mit-remote-making@mit.edu