Page History

...

1. Check below to see that your use falls within guidelines
2. Complete, sign, and submit the MIT 

   Excerpt Include
   Remote Making Risk Acknowledgement Remote Making Risk Acknowledgement nopanel true

3. Complete and submit the  for the 

   Excerpt Include
   Remote Making Checklist Remote Making Checklist nopanel true

    for this tool
4. If the checklist:
   
   1. Directs you to complete other requirements, do not proceed, we will contact you to discuss
   2. Does not require training or indicate other unfulfilled requirements, you may use the tool

...

• Use on foams that have been approved for hot cutting in areas with adequate ventilation

  • OK to cut: polystyrene, polyethylene, EVA

  • Not OK to cut: polyurethane, polyisocyanurate

• Adequate ventilation is satisfied if using

  • Outdoors: in a wide open space (not in a shed)

  • Indoors: with an adequate active exhaust system (fume hood, fans, and windows that provide cross flow ventilation);
    Note: DO NOT USE in indoor spaces that may contain flammable materials or flammable residue, such as paint booths or auto garages, even if ventilation is present

• If you must cut indoors, contact us (mit-remote-making@mit.edu) and we can advise on ventilation

...

Forms and contact information required to obtain approval to use this technology/tools

• Link: 

  Excerpt Include
  Remote Making Risk Acknowledgement Remote Making Risk Acknowledgement nopanel true

• Link: 

  Excerpt Include
  Remote Making Checklist Remote Making Checklist nopanel true

• Email: Q&A and Discussion to mit-remote-making@mit.edu