Comment:
Migration of unmigrated content due to installation of a new plugin
Excerpt
hidden
true
Examine the work needed to change the radius of rotation of an object rotating in a circle.
Image Added
A small object with a mass of 0.250 kg has been attached to a massless string, and is moving in a circle on a perfectly level frictionless tabletop. The string passes through a hole in the center of the table, and is held by a person. Suppose that initially the mass is rotating with an angular speed of 15.0 rad/s around a circle of radius 0.400 m. The person then pulls the string in such a way as to reduce the radius of the circle at a constant rate. The person stops reducing the radius when the object is making a circle of radius 0.200 m. How much work did the person do in the course of reducing the radius of the circle?
Solution
We will approach the problem in two ways. First, we will use the change in mechanical energy to obtain the answer in a straightforward manner. We will then compare our answer to that obtained using the (considerably more complicated) method of computing the integral of the force times displacement along the path.
Composition Setup
Deck of Cards
id
bigdeck
Wiki Markup
!puckonstring.png!
{excerpt:hidden=true}Examine the work needed to change the radius of rotation of an object rotating in a circle.{excerpt}
A small object with a mass of 0.250 kg has been attached to a massless string, and is moving in a circle on a perfectly level frictionless tabletop. The string passes through a hole in the center of the table, and is held by a person. Suppose that initially the mass is rotating with an angular speed of 15.0 rad/s around a circle of radius 0.400 m. The person then pulls the string in such a way as to reduce the radius of the circle at a constant rate. The person stops reducing the radius when the object is making a circle of radius 0.200 m. How much work did the person do in the course of reducing the radius of the circle?
h4. Solution
We will approach the problem in two ways. First, we will use the change in mechanical energy to obtain the answer in a straightforward manner. We will then compare our answer to that obtained using the (considerably more complicated) method of computing the integral of the force times displacement along the path.
h4. Method 1
*System:* The object as a [point particle] undergoing [pure rotation].
*Interaction:* External forces from the string (tension, non-conservative), the earth (gravity, conservative) and the table (normal force, non-conservative).
*Model:* [1-D Angular Momentum and Torque] plus [Mechanical Energy and Non-Conservative Work].
*Approach:* The table is level, so the [gravitational potential energy] will be constant. We can set it to zero by taking the height of the tabletop to be zero. The normal force is perpendicular to the motion of the object and so does no work. The only force capable of performing work on the object is the tension, which is equal to the force from the person pulling on the string. Thus, the work done by tension will equal the work done by the person. This work can be computed by finding the change in mechanical energy of the object:
{latex}
Card
label
Method 1: Energy
Method 1: Energy
Toggle Cloak
id
sys1
System:
Cloak
id
sys1
The object as a undergoing .
Toggle Cloak
id
int1
Interaction:
Cloak
id
int1
External forces from the string (tension, non-conservative), the earth (gravity, conservative) and the table (normal force, non-conservative).
Toggle Cloak
id
mod1
Model:
Cloak
id
mod1
plus .
Toggle Cloak
id
app1
Approach:
Cloak
id
app1
Toggle Cloak
id
part1
Consider the Energy
Cloak
id
part1
The table is level, so the gravitational potential energy will be constant. We can set it to zero by taking the height of the tabletop to be zero. The normal force is perpendicular to the motion of the object and so does no work. The only force capable of performing work on the object is the tension, which is equal to the force from the person pulling on the string. Thus, the work done by tension will equal the work done by the person. This work can be computed by finding the change in mechanical energy of the object:
\begin{large}\[ K = K_{\rm rot} = \frac{1}{2}I\omega^{2}\]\end{large}
{latex}
For
a
point
particle,
{
Latex
}
\begin{large}\[ I = mr^{2}\]\end{large}
{latex}
and
so:
{
Latex
}
\begin{large}\[ W = \frac{1}{2}m\left(r_{f}^{2}\omega_{f}^{2} - r_{i}^{2}\omega_{i}^{2}\right)\]\end{large}
{latex}
{warning}Note that we have assumed the mass is constant, but we cannot assume the angular speed is constant.{warning}
We already have the initial and final radius of the motion, but we do not yet have the angular speed. To find it, we consider the torque on the system. We choose the natural location for the axis by locating it at the center of the circle.
!puckonstringfbd.png!
With this choice, we can see that there is zero net torque on the system, since the [moment arm] for the tension is zero. With the net torque equal to zero, we are in the special case of constant angular momentum, so:
{latex}
Warning
Note that we have assumed the mass is constant, but we cannot assume the angular speed is constant.
Cloak
part1
part1
Toggle Cloak
id
part2
Consider the Angular Momentum
Cloak
id
part2
We cannot yet substitute into the equation obtained by considering the object's energy. We do already have the initial and final radius of the motion, but we do not yet have the angular speed. To find it, we consider the torque on the system. We choose the natural location for the axis by locating it at the center of the circle.
Image Added
With this choice, we can see that there is zero net torque on the system, since the moment arm for the tension is zero. With the net torque equal to zero, we are in the special case of constant angular momentum, so:
\begin{large}\[ W = \frac{1}{2} mr_{i}^{2}\omega_{i}^{2}\left(\frac{r_{i}^{2}}{r_{f}^{2}} - 1\right) =\mbox{13.5 J}\]\end{large}
{latex}
----
h4. Method 2
*System:* The object as a [point particle] undergoing [pure rotation].
*Interactions:* External forces from the string (tension), the earth (gravity) and the table (normal force).
*Model:* [Point Particle Dynamics], [1-D Angular Momentum and Torque] plus the definition of [work].
*Approach:* To move the object radially inward at constant speed, the tension force must simply provide the centripetal force.
{note}No _additional_ radial acceleration is needed, since the change in radius is at a constant rate.{note}
We therefore have:
{latex}\begin{large}\[ T = m\omega^{2} r \] \end{large}{latex}
Since, as discussed in Method 1 above, the only force that does work is the tension, we can now use the definition of work:
{latex}\begin{large} \[ W = \int_{r_{i}}^{r_{f}} \vec{T}\cdot d\vec{r} = - \int_{r_{i}}^{r_{f}} m\omega^{2}r\:dr\]\end{large}{latex}
{note}Note that the tension force points radially inward so that the dot product gives a negative sign.{note}
Before we can evaluate this integral, we must determine the dependence of ω on _r_. As in Method 1, we make use of the fact that (if we choose the center of the circle for the axis of rotation) the angular momentum of the object is constant. Thus:
{latex}\begin{large}\[ I(r)\omega(r) = I_{i}\omega_{i} \]\end{large}{latex}
Or, by using the formula for the moment of inertia of a point particle:
{latex}\begin{large}\[ \omega(r) = \omega_{i}\left(\frac{r_{i}}{r}\right)^{2}\]\end{large}{latex}
Inserting this formula into our expression for work gives:
{latex}\begin{large}\[ W = -\int_{r_{i}}^{r_{f}} m\omega_{i}^{2}r_{i}^{4} r^{-3} \:dr = \frac{1}{2} mr_{i}^{2}\omega_{i}^{2}\left(\frac{r_{i}^{2}}{r_{f}^{2}} - 1\right) \]\end{large}{latex}
{tip}The same expression found using Method 1.{tip}
{note}Note that the integrand in the above formula is the magnitude of the tension in the string. This shows that the tension increases as 1/_r_^3^ as the radius of the circle is reduced.
!tension.gif!{note}
Cloak
part2
part2
Cloak
app1
app1
Card
label
Method 2: Dynamics
Method 2: Dynamics
Toggle Cloak
id
sys2
System:
Cloak
id
sys2
The object as a undergoing .
Toggle Cloak
id
int2
Interactions:
Cloak
id
int2
External forces from the string (tension), the earth (gravity) and the table (normal force).
