Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin
Composition Setup

Excerpt
hiddentrue

A good roller coaster uses significant turning accelerations to produce large swings in the rider's apparent weight.

Image Added

A good roller coaster causes dramatic swings in the rider's apparent weight. Calculate the magnitude of the force exerted by their seat on a rider with a (regular) weight of 700 N at the points labeled A-F in the picture above, assuming the coaster starts from rest at the top of the first hill and that the coaster is frictionless. (Recall that this seat force will give an idea of how "heavy" the rider feels at each point in the ride.) For Part A, use the values:

h1

h2

h3

r1

r2

r3

75 m

15 m

70 m

25 m

20 m

14 m

as labeled in the picture below.

Image Added

Solution

Toggle Cloak
idsys
System:
Cloak
idsys

Rider as .

Toggle Cloak
idint
Interactions:
Cloak
idint

The conservative influence from the earth (gravity) will be assigned a for this problem. The seat's influence (normal force) is the only , but since the rider travels with velocity always parallel to the track, the normal force is always perpendicular to the path and does zero , and so we will neglect it when using the model. The normal force will be relevant for the dynamics of the car.

Toggle Cloak
idmod
Models:
Cloak
idmod

, and .

Toggle Cloak
idapp
Approach:

Cloak
idapp

Toggle Cloak
iddiag
Diagrammatic Representation

Cloak
iddiag

We begin by using Point Particle Dynamics to relate the normal force from the seat to other quantities. This requires free body diagrams:

Image Added

Image Added

Image Added

Image Added

Image Added

Image Added

Point A

Point B

Point C

Point D

Point E

Point F

Note

As usual, we have made a guess about the relative sizes of the normal force and gravity. The accuracy of this guess is not vital to solving the problem, only the direction of the forces matter (parallel to gravity, perpendicular to gravity, etc.). If the relative sizes do not make sense to you now, consider them again after solving Part A.

Info

Technically, roller coaster seats can also exert forward (from the seat back) and backward (from the restraining straps or bars) forces on the rider. In the limit of a very short coaster (say one car) with very little friction/air resistance these forces are basically zero because gravity will accelerate the person and the coaster at the same rates. What would the seat force on a rider in the front or back car of a very long (many cars) roller coaster look like?

Cloak
diag
diag

Toggle Cloak
iddynamics
Dynamics

Cloak
iddynamics

These free body diagrams give the following form for the relevant component Newton's 2nd Law at the points of interest:

...

Latex
\begin{large}\[\sum F_{y} = N - mg = ma_{y}\]\end{large}

...

Latex
\begin{large}\[\sum F_{y} = N - mg = ma_{y}\]\end{large}

...

Latex
\begin{large}\[\sum F_{x} = -N = ma_{x}\]\end{large}

...

Latex
\begin{large}\[\sum F_{y} = - N - mg = ma_{y}\]\end{large}

...

Latex
\begin{large}\[\sum F_{x} = N = ma_{x}\]\end{large}

...

Latex
\begin{large}\[\sum F_{y} = N - mg = ma_{y}\]\end{large}

...

Point A

Point B

Point C

Point D

Point E

Point F

Note

We have only included the equation for the direction that includes the normal force.

At each point of interest (A-F)

...

the

...

coaster

...

is

...

traveling

...

a

...

circular

...

path.

...

The

...

Uniform

...

Circular

...

Motion

...

model

...

therefore

...

implies

...

the

...

presence

...

of

...

a

...

radial

...

component

...

of

...

acceleration

...

given

...

by:

...

Latex
\begin{large}\[a_{y} = +\frac{v_{A}^{2}}{r_{1}}\]\end{large}

...

Latex
\begin{large}\[a_{y} = +\frac{v_{B}^{2}}{r_{2}}\]\end{large}

...

Latex
\begin{large}\[a_{x} = - \frac{v_{C}^{2}}{r_{2}}\]\end{large}

...

Latex
\begin{large}\[a_{y}= - \frac{v_{D}^{2}}{r_{2}}\]\end{large}

...

Latex
\begin{large}\[a_{x} = \frac{v_{E}^{2}}{r_{2}}\]\end{large}

...

Latex
\begin{large}\[a_{y}= -\frac{v_{F}^{2}}{r_{3}}\]\end{large}

Point A

Point B

Point C

Point D

Point E

Point F

Note

It is very important to correctly identify the sign of the acceleration. The acceleration must be directed toward the center of the circular path in each case.

Cloak
dynamics
dynamics

Toggle Cloak
idenergy
Energy

Cloak
idenergy

We can now solve our equations for the normal force if we can find the speed of the person at each of the points of interest. We can accomplish this by using the fact that the mechanical energy of the person is constant in this problem (since the normal force does no work).

Since the person is at rest atop the first hill, the person's total mechanical energy is (taking h=0 to be at the location of the dotted line in the figure above):

Latex
{latex}|
||Point A||Point B||Point C||Point D||Point E||Point F||

{note}It is very important to correctly identify the sign of the acceleration.  The acceleration must be directed toward the center of the circular path in each case.{note}

We can now solve our equations for the normal force if we can find the speed of the person at each of the points of interest.  We can accomplish this by using the fact that the [mechanical energy] of the person is constant in this problem (since the normal force does no work).  

Since the person is at rest atop the first hill, the person's total mechanical energy is (taking h=0 to be at the location of the dotted line in the figure above):

{latex}\begin{large}\[ E_{tot} = mgh_{1}\]\end{large}{latex}

To

...

find

...

the

...

speed

...

at

...

point

...

A,

...

we

...

then

...

write:

{
Latex
}\begin{large}\[ E_{A} = K_{A} + U_{A} = \frac{1}{2}mv_{A}^{2} + mgh_{A} = \frac{1}{2}mv_{A}^{2} = E_{tot} = mgh_{1} \]\end{large}{latex}

which

...

implies:

{
Latex
}\begin{large}\[ v_{A}^{2} = 2gh_{1} \]\end{large}{latex}

We

...

can

...

repeat

...

this

...

procedure

...

exactly

...

for

...

each

...

of

...

the

...

points

...

if

...

we

...

can

...

define

...

the

...

height

...

of

...

the

...

person

...

at

...

each.

...

From

...

the

...

figures,

...

we

...

can

...

see

...

that

...

these

...

heights

...

are:

...

Latex
\begin{large}\[h_{A} = 0 \]\end{large}

...

Latex
\begin{large}\[h_{B} = h_{2}\]\end{large}

...

Latex
\begin{large}\[h_{C} = h_{2} + r_{2}\]\end{large}

...

Latex
\begin{large}\[h_{D} = h_{2}+2r_{2}\]\end{large}

...

Latex
\begin{large}\[h_{E} = h_{2} + r_{2}\]\end{large}

...

Latex
\begin{large}\[h_{F} = h_{3}\]\end{large}

...

Point A

Point B

Point C

Point D

Point E

Point F

which means the speeds are given by:

Latex
\begin{large}\[v_{A}^{2} = 2gh_{1} \]\end{large}

...

Latex
\begin{large}\[v_{B}^{2} = 2g(h_{1}-h_{2})\]\end{large}

...

Latex
\begin{large}\[v_{C}^2 = 2g(h_{1} - h_{2} - r_{2})\]\end{large}

...

Latex
\begin{large}\[v_{D}^{2} = 2g(h_{1} - h_{2}-2r_{2})\]\end{large}

...

Latex
\begin{large}\[v_{E}^{2} = 2g(h_{1}-h_{2} - r_{2})\]\end{large}

...

Latex
\begin{large}\[v_{F}^{2} = 2g(h_{1}- h_{3})\]\end{large}

...

Point A

Point B

Point C

Point D

Point E

Point F

Substituting into the expressions for the radial acceleration and then substituting them into the equations from Newton's 2nd Law gives the normal force at each point (we combine points C and E since they give the same value):

Latex
\begin{large}\[ N  = mg + m\left(\frac{2gh_{1}}{r_{1}}\right)\]\[= 7 mg = \mbox{4900 N}\]\end{large}

...

Latex
\begin{large}\[N  = mg + m\left(\frac{2g(h_{1}-h_{2})}{r_{2}}\right)\]\[ = 7 mg = \mbox{4900 N}\]\end{large}

...

Latex
\begin{large}\[N = m\left(\frac{2g(h_{1}-h_{2}-r_{2})}{r_{2}}\right)\]\[ = 4 mg = \mbox{2800 N}\]\end{large}

...

Latex
\begin{large}\[N  = m\left(\frac{2g(h_{1}-h_{2}-2r_{2})}{r_{2}}\right)- mg\]\[ = mg = \mbox{700 N}\]\end{large}

...

Latex
\begin{large}\[N  = mg - m\left(\frac{2g(h_{1}-h_{3})}{r_{3}}\right)\]\[ = \frac{2}{7}mg = \mbox{200 N}\] \end{large}

Point A

Point B

Point C or Point E

Point D

Point F

Info

The difference of 6 mg between the normal force at the top of the loop-the-loop and the bottom is characteristic of a circular loop-the-loop without frictional losses.

Follow Up Questions

  1. If our equations result in a negative normal force, it means that the person will tend to fly out of their seat. Even though passengers are belted in, amusement parks take care to avoid this situation since the restraints are meant to be a safety backup rather than a primary component of the ride. Suppose that our coaster parameters were changed so that points D and F were at the same height. Which radius, r2 or r3, should be larger in order to ensure that the normal force is always greater than zero during the ride?
  2. Accelerations approaching 10_g_ can be dangerous. Suppose that we changed the parameters of our coaster to make h2 = 0 and selected h1 to give N = 0 at point D (the top of the loop). What is the minimum value for r1 such that N < 8 mg?
Cloak
energy
energy

{latex}| ||Point A||Point B||Point C or Point E||Point D||Point F||
Cloak
app
app