Required Materials:
Test Fin Can:
-fiberglass
-plywood (1/4")
-epoxy: West Systems 6 or 24 hour OR Aeropoxy (cheaper, but needs oven cure)
-5minute (to stick fins to tube)
-some cheap tube
-bagging materials:
-release film
-bleeder fabric
-vacuum bag
-peel ply
Actual Fin Can
-Mylar (for initial layup over tube)
-Phenolic tube
-CF (5.7 oz, 2x2 twill/plain weave)
-epoxy (6 or 24 hour for root bond, not oven cure)
Laminating epoxy (24hour) if oven curing
-G10 (1/8")
-Phenolic (1/4")
-15deg end mill (LOOK INTO THIS)