...
This specification will define tube diameters for Rocket Team vehicles, maintaining maximum compatibility with commercially available options. This will enable analysis of specific fiber and ply schedules to standardize acceptable loads. These values include built in tolerances.
...
152 mm (6 in) Series Tubes
| Name | Nominal ID | Nominal OD | Notes |
|---|---|---|---|
| Thrust Ring | N/A | 6.15 | Typical feature on COTS motor cases for transferring axial load into air frame components. |
| Body Tube | 65.00 823 in | 6.17 00 in | Body tube is the typical outer most tube in commercial rockets. Nose cones typically available in this size. A vehicle with a 6in series motor and 6in body tube is referred to as 'minimum diameter' |
| Coupler | 5.775616 in | 5.998 812 in | Typically acts as a structural join between body tube sections. Diameter of motor. A vehicle built from these tubes axially stacked on a motor case is called 'sub-minimum diameter' |
| StepMotor Case | 5.53050 in5 | 6.7500 in | Typically the size of Avionics Bay bulkhead centering features or joining tubes on sub-minimum diameter vehicles. |
...
98 mm (
...
4 in) Series Tubes
...
| Name | Nominal ID | Nominal OD | Notes |
|---|---|---|---|
| Thrust Ring | N/A | 64.1502 | Typical feature on COTS motor cases for transferring axial load into air frame components. |
| Body Tube | 53.823 900 in | 64.00 024 in | Body tube is the typical outer most tube in commercial rockets. Nose cones typically available in this size. A vehicle with a 6in series motor and 6in body tube is referred to as 'minimum diameter' |
| Coupler | 53.625 755 in5 | 3.812 899 in | Typically acts as a structural join between body tube sections. Diameter of motor. A vehicle built from these tubes axially stacked on a motor case is called 'sub-minimum diameter' |
| Motor CaseStep | 53.50 75 in | 63.00 625 in | Typically the size of Avionics Bay bulkhead centering features or joining tubes on sub-minimum diameter vehicles. |
...
75 mm (
...
3 in) Series Tubes
| Name | Nominal ID | Nominal OD | Notes | |
|---|---|---|---|---|
| Thrust Ring | N/A | 4.02 | Typical feature on COTS motor cases for transferring axial load into air frame components. | |
| Body Tube | 3.900 000 in | 43.024 125 in | Body tube is the typical outer most tube in commercial rockets. Nose cones typically available in this size. A vehicle with a 6in series motor and 6in body tube is referred to as 'minimum diameter' | |
| Coupler | 32.755 878 in3 | 2.899 998 in | Typically acts as a structural join between body tube sections. Diameter of motor. A vehicle built from these tubes axially stacked on a motor case is called 'sub-minimum diameter' | |
| Step | 3.75 in | N/A | 3.625 in | Typically the size of Avionics Bay bulkhead centering features or joining tubes on sub-minimum diameter vehicles. |