Page History

...

1. Check below to see that your use falls within guidelines
2. Complete, sign, and submit the MIT 

   Excerpt Include
   Remote Making Risk Acknowledgement Remote Making Risk Acknowledgement nopanel true

3. Complete and submit the  for the 

   Excerpt Include
   Remote Making Checklist Remote Making Checklist nopanel true

    for this tool
4. You will be contacted to discuss the plan, feasibility, modifications, etc.
5. If the checklist:
   
   1. Directs you to complete training/etcother requirements, do not proceed, we will contact you to discuss
   2. Does not require more training/etctraining or indicate other unfulfilled requirements, you may use the tool

Minimum required PPE and precautions (more may be required based on circumstance)

Most important safety considerations (issues, resources, advice, warnings)

• Tool Specific:

  • Always secure the material

  • Always hold the tool with two hands

  • Make use of the variable speed (usually depends on pressure applied to trigger)  for different cutting situations (e.g. don’t go full speed to start a cut)

• General:

  • Have respect for this tool, common tools like this can cause injury

  • Remove the battery or unplug cord before changing bits/blades/tools

  • Do not wear baggy clothing, loose sleeves or jewelry

  • Hair and beard should be pulled back in a hair tie or under a hat

  • Do not apply excessive pressure, let the tool do the work

  • If too much pressure is needed, something is wrong (dull, wrong tool, etc..)

  • Use a sharp blade/tool, dull blades lead to excessive heat and need for excessive pressure

  • Woodworking machines and tools shall not be used without the proper machine-specific training

  • Safety glasses must be worn, hearing protection should be worn with most power tool use.

  • No loose fitting and untucked clothes.  Tassels should be tied or tucked in.

  • Hair and beards should be tied back.

  • Do not wear gloves if the machine or tool has moving parts.

  • Use of powered machines and tools requires a buddy

  • Never use tools other than for their stated intention

  • Use care when operating machines or tools with high velocity and/or sharp parts

  • Never cut towards your own body. Your hand is a part of your body.

  • All appropriate guards that allow you to perform the desired action must be in place 

  • Ensure your setup has adequate dust collection

  • Unplug and control all cord powered tools before changing blades, or making adjustments to cutting tooling

  • Use water based finishes whenever possible. 

  • Always dispose of finishing implements properly by laying them flat on non-combustible surfaces to dry before disposal

...

Forms and contact information required to obtain approval to use this technology/tools

• Link: 

  Excerpt Include
  Remote Making Risk Acknowledgement Remote Making Risk Acknowledgement nopanel true

• Link: 

  Excerpt Include
  Remote Making Checklist Remote Making Checklist nopanel true

• Email: Q&A and Discussion to mit-remote-making@mit.edu