Troubleshooting
In order to ensure proper communication with the Nyden motor controller, check that the Lantronix Serial to Ethernet controller is set to its default communication settings. To access these setting in the lab, telnet into the Serial to Ethernet box by typing "telnet 18.75.3.111 9999". The default settings are:
- Interface Control: (4C)
- No Flow Control: (00)
- Port Number: 10001
- Connect Mode: (C0)
- DisConnMode: (00)
- FlushMode: (00) (This also selects no packet control).
The user's manual can be found here.