The following labs or departments use MUMMS currently
Fab.Nano
- MTL
- EBL
- PalaciosLab
- LEAP
- CryoEM
Each of them offers some services to the lab users. The services vary depending on the departments or the laboratories.
For example, here are some of the services currently provided by Fab.Nano
B12 - - Access to Building 12 Fab.Nano Laboratories
B39-2 – Access to Building 39 2nd Floor Fab.Nano Laboratories
B39-4 – Access to Building 39 4th Floor Fab.Nano Laboratories
B39-5 – Access to Building 39 5th Floor Fab.Nano Laboratories
- B39_Packaging – Access to Building 39 Fab.Nano Packaging Equipment
Other laboratories or departments may provide different services. This table summarizes the labs and their services
| Lab | Service Name | Service Description |
| Fab.Nano | B12 | Access to Building 12 Fab.Nano Laboratories |
| Fab.Nano | B39-2 | Access to Building 39 2nd Floor Fab.Nano Laboratories |
| Fab.Nano | B39-4 | Access to Building 39 4th Floor Fab.Nano Laboratories |
| Fab.Nano | B39-5 | Access to Building 39 5th Floor Fab.Nano Laboratories |
| Fab.Nano | B39_Packaging | Access to Building 39 Fab.Nano Packaging Equipment |
| Fab.Nano | Proxy_Lab | Remote Use of Fab.Nano services |
| Fab.Nano | Gas_Line | Gas Line Service for Gas Lines |
| MTL | CAD | Access to MTL CAD Computer Software |
| MTL | Compute_Access | Login Access to MTL Computers |
| MTL | Compute_Account | MTL Computer Identity (No Login Access) |
| MTL | Computer_Network | Network Service for Computers |
| MTL | Computer_Support | Support Service for Computers |
| EBL | EBL | Access to Building 24 EBL Facilities |
| LEAP | LEAP_Packaging | Access to Building 12 5th Floor Packaging Facilities |
| CryoEM | CryoEM | Access to Building 12 Cryo Facilities |
| PalaciosLab | PalaciosLab | Access to Building 38 Tomas Palacios Lab Facilities |
Adding Services
MUMMS users can add or remove a service from Manage Your Services page. To add a service that is not in their current service list, just select the service from drop down list under the Add Service section and click Add button.
If a user has a service from a lab that associated with “Lab Usage” charge category and user did not have any Lab Usage charges before, supervisor and cost object allocations will need to be set up for payment of those charges before those services will become active. The user should assign a preliminary cost object to pay for these charges, which will notify the supervisor that allocations need to be approved. This can be done from Manage Your Services page.
The new services will not be active until the required prerequisites are completed. For example, The Access to Building 39 2nd Floor Fab.Nano Laboratories requires EHS compliance. The users can check the status of their services at Manage Your Services.