Test Fin Can Procedure
Required Materials
Flight Fin Can Procedure
Required Materials
-Mylar (for initial layup over tube)
-Phenolic tube
-CF (5.7 oz, 2x2 twill/plain weave)
-wax paper
-spray glue
-epoxy (6 or 24 hour for root bond, not oven cure)
-squeegees
-rollers
Laminating epoxy (24hour) if oven curing
-G10 (1/8")
-Phenolic (1/4")
-15deg end mill (LOOK INTO THIS, talk to ethan)
-Mandrel
-Bagging materials (peel ply, bleeder fabric, release film, vacuum bag and vacuum tape)
-ppl with respirators
-proline (for root filler)
-little popsicle sticks
-big popsible sticks
-3D printed fillet tool
-boats for epoxy
Preparation:
FIT PHENOLIC OVER MOTOR TUBE
Fin jig
-1/4" MDF
-MAKE SURE HOLES ARE BIG ENOUGH
-Fin thickness
Test Fin Can Procedure
1) Cut fins to shape
2) Bevel edges of fins (sand them)
3) Stick wax to fiberglass using spray glue
4) Cut fiberglass shapes (for fin layup) with scissors (HOW)
5) Record mass of fiberglass (will use later to calculate wetness ratio)
6) Mark centerline
) Cut tube to size
) Score tube (coarse grit 60-180)
) score fins
2) Put tube in jig
3) Put 5-minute on backs of fins
4) Put fins in
5) Finish assembling jig (put top layer on --> push so that it gets caught on leading edge, BE CAREFUL after glue is set and of messing up LE
) let cure, take it out
) put on your respirator
) mix laminating epoxy with colloidal silica
)use fillet tool to add fillets
)let cure
) sand
)mark centerlines on the tube
TIP 2 TIP
) mix epoxy
) weight amount of epoxy used
) wet the glass sheets with laminating epoxy using squeegees
) layup
) vacuum bag (MAKE VACUUM BAG PROCEDURe --> see vacuum procedure)
POSt -procesing
Flight Fin Can Procedure
) cut fins
)wax spray CF
) cut shapes
) weight shapes
) cut tube to length
) make sure it fits over motor case
) score eryting
CF layup around tube
) make appropriate fin jig
) assemble in fin jig , root bond
) prepare preforms
) do inner fillets
) sand
) outer fillets
) sand outer fillets
TIP TO TIP
) mix epoxy
)weigh epoxy
) layup
)bag it up til past tacking (+ ONE DAY)
) oven cure? (autoclave)
) sand
) eat donuts