Design

The soft goods attachment is a disk that fits into the nosecone on the sustainer. For the booster, the soft good attachment fits into the staging cone.

Features:

• A center hole for the bolt that will anchor the piece to either the nose cone tip or the top of the staging cone
• 4 holes spaced around the center hole to allow the soft goods to be threaded through

Fabrication:

• Waterjet
• Hammer

Dimensions and Material:

• 1.02 in. diameter
• 0.25 in. thickness
• 0.25 in. diameter central hole
• 0.22 in. diameter surrounding holes
• Aluminum 6061

Extra Notes:

• Tabs should not be too thick so that the part can be hammered out easily; only one is necessary