Follow these steps to setup a bootable sd card for the gumstix overo
cd ~/gumstix/rootfs sudo rsync -aP . /media/rootfs/ sync cd ~/gumstix/linux sudo INSTALL_MOD_PATH=/media/rootfs make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_install sync sudo umount /media/boot sudo umount /media/rootfs |
We'll need to connect via serial the first time we boot up to ensure that everything goes well. First boot will take a while, but future ones should be quick. After it's done install openssh-server and the reconnect to the gumstix via ssh.
Return to the goby wiki and follow the instructions to setup distcc on the gumstix. Next install software according to the instructions on the software installation page.
Duovero:
git clone git://www.sakoman.com/git/linux linux cd linux git checkout omap-3.6 |
defconfig saved as omap4_defconfig and pulled from:
no changes to defconfig
MLO and u-boot from script found at:
http://feeds.sakoman.com/feeds/yocto-1.3/images/omap4-multi/current/
will need package g++-4.6-arm-linux-gnueabi=4.6.3-15, add emdebian wheezy and sid to apt sources similar to squeeze as described on goby wiki.
NTP:
http://ubuntuforums.org/showthread.php?t=862620
Compiler information: vehicles should use g++-4.4
distcc host must have g++-4.4-arm-linux-gnueabi=4.4.5-8
apt-pin:
Package: *-4.4-arm-linux-gnueabi* *-4.4-dev-armel-cross Pin: version 4.4.5-8 Pin-Priority: 1100 |