You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Circular Saw

This activity is listed as:

🔶OrangeRequires submission of safety plan and approval by EHS

 

The process  to receive approval for this tool is:

  1. Check below to see that your use falls within guidelines
  2. Complete, sign, and submit the MIT 
  3. Develop your Remote Making Safety Plan with your faculty/staff oversight; look at the  form for guidance since you will need to fill out the form in Step 4
  4. Submit your 
  5. You will be contacted to discuss the plan, feasibility, modifications, etc.
  6. EHS will approve use of this tool once/if all safety and feasibility requirements are met
  7. As pre-COVID, staff/faculty are responsible for making sure the safety plan is followed

Minimum required PPE and precautions (more may be required based on circumstance)

  • Safety glasses

  • Hearing protection

  • Long pants and closed toed shoes

 

Hazards to be addressed in Safety Plan

  • Wood dust inhalation

Most important safety considerations (issues, resources, advice, warnings)

  • Tool Specific:

    • Never stand directly behind the tool while cutting; always stand to one side

    • Secure your workpiece when appropriate

    • Never tamper with the blade guard

    • Use appropriate blades for a given material

    • Never drop cut without a drop blade saw

  • General:

    • Woodworking machines and tools shall not be used without the proper machine-specific training

    • Safety glasses must be worn, hearing protection should be worn with most power tool use.

    • No loose fitting and untucked clothes.  Tassels should be tied or tucked in.

    • Hair and beards should be tied back.

    • Do not wear gloves if the machine or tool has moving parts.

    • Use of powered machines and tools requires a buddy

    • Never use tools other than for their stated intention

    • Use care when operating machines or tools with high velocity and/or sharp parts

    • Never cut towards your own body. Your hand is a part of your body.

    • All appropriate guards that allow you to perform the desired action must be in place 

    • Ensure your setup has adequate dust collection

    • Unplug and control all cord powered tools before changing blades, or making adjustments to cutting tooling

    • Use water based finishes whenever possible. 

    • Always dispose of finishing implements properly by laying them flat on non-combustible surfaces to dry before disposal

Most important considerations in the use of the tool/technology (issues, resources, advice, warnings)

  • Measure thrice, cut twice

Links or info about video/images and complementary or alternative tools/tech to consider

Forms and contact information required to obtain approval to use this technology/tools

  • No labels