Currently, the best solution for finishing (i.e. stapling, hole-punching, additional document formatting) is to use the copier function on m76-158-mfc, m76-194-mfc, m76-368-mfc, and m76-568-mfc.

To do this, you will need to sign in to the copier as normal. 

  1. First, release your unfinished print job via Papercut. For instructions on how to do this, please see here.
     
  2. Once that's done, insert the printed job into the copy feeder tray.
  3. Then, on the touch panel, tap the Home button on the right side to exit Papercut.
  4. Tap 'Copy'. Adjust copy settings as needed.
  5. Tap 'Finishing', then select an option.
  6. Finally, tap 'Start'. If you placed documents in the feeder, scanning continues until the feeder is empty.