Optional SRT trailer Assembly
This link provides instructions for placing an SRT on a movable trailer.

SRT CASSI Mount Assembly Instructions
The current version of the SRT mount was developed by Cassi Corp. Instructions for assembly of this mount can be found on the Cassi web site by following the above link.

The PDF files below contain additional information for installing and setting up the SRT.

Assembly Note: Lubrication of the Azimuth and Elevation Drive Shafts

Users may experience problems of very slow or little Azimuth and Elevation drive motion after the units are assembled.

Information from the mount manufacturer, Kaul-Tronics, Inc, indicates that the drive shaft sleeve bearings are NOT GREASED before shipping. This is intended to eliminate the possibility of grease spillage on other parts during shipping. The lack of lubrication on the shaft sleeve can create a problem when users attempt to move the telescope. This problem can be variable by unit.

There is a grease fitting at the midpoint of each of the drive shaft housings. (close-up image) Grease can be applied to the sleeve bearings with the use of a standard automobile grease gun.
The user SHOULD DO THIS PRIOR TO THE FIRST MOTION TEST.

  • No labels