...
- Obtain all required materials and inspect parts for defects.
- Insert and screw a modified 1/4 NPT plug into one of the two female ends of the 1/4 NPT tee adapter.
- Pack the black powder in a "pillow" using Blue Tape and tape it around the Firebolt E-match head. Make sure that the E-match is shorted. you can use some clay to seal it.
- Insert and screw the FireBolt into the modified 1/4 NPT plug using Teflon tape, only applying the tape above the slot in the FireBolt. Be sure that the E-match is shorted.
- Repeat steps 2 and 3 for the other female end of the 1/4 NPT tee adapter.
- From here on, use appropriate PPE of nitrile gloves and goggles.
- Measure out the required amount of black powder on a scale.Pack the black powder in a "pillow" using Blue Tape.
- Insert and screw the entire assembly into the air inlet hole of the piston. Use Teflon tape to ensure a good fit.
...