In order to determine which ablatives to use for our nose cone (and as a helpful guide for future purposes), we are setting up a test rig that uses a propane blowtorch to heat small samples of fiberglass. This document from Apogee Components was used as inspiration for this test procedure. Apogee Newsletter
Below is the matrix for samples used in this thermal test matrix.
| 5-Layer Fiberglass | 10-Layer Fiberglass | |
|---|---|---|
| Control (West Systems epoxy) | ||
| West Systems + Phenolic microballoons | ||
| West Systems + Cork microballoons | ||
| West Systems + High temperature paint | ||
| West Systems + Cotronics 4700 |
Below is the test matrix for the parameters measured during this test. (Fill later with results).
Test Stand
<insert pics>
Setting up thermocouples
...