Page History

...

Below is the test matrix for the parameters measured during this test. (Fill later with results).

	Fiberglass- CONTROL						Fiberglass + Phenolic Microballoons						Fiberglass + High-temp						Fiberglass + Microballoons + Paint						Phenolic
	5-Layer			10-Layer			5-Layer			10-Layer			5-Layer			10-Layer			5-Layer			10-Layer
	2-1'	2-2'	2-3'	3-1'	3-2'	3-3'	4-1'	4-2'	4-3'	5-1'	5-2'	5-3'	6-1'	6-2'	6-3'	7-1'	7-2'	7-3'	8-1'	8-2'	8-3'	9-1'	9-2'	9-3'	1-1'	1-2'	1-3'
Initial dry mass (no hole) - oz	0.135	0.130	0.150	0.290	0.295	0.280	0.140	0.150oz	0.160	0.305	0.300	0.305	0.150	0.130	0.135	0.295	0.280	0.305	0.140	0.140	0.140	0.270	0.270	0.285	0.785	0.780	0.780
Initial dry average thickness - mm	1.016667	1.01	1.043333	2.053333	1.996667	1.95	0.993333	0.963333	1.083333	2.126667	2.13	2.046667	1.093333	0.936667	0.91	1.936667	1.84	1.886667	0.846667	0.84	0.803333	1.75	1.753333	1.75	6.2	6.153333	6.13
Thickness 1	1.03	0.98	1.03	2.08	2.02	2	1	1.01	1.06	2.26	2.05	2.01	1.07	0.92	0.88	1.92	1.83	1.85	0.79	0.84	0.84	1.8	1.8	1.78	6.18	6.16	6.14
Thickness 2	0.97	1	1.06	2.02	2.02	1.94	1	0.94	1.07	2.08	2.16	2.06	1.16	0.92	0.91	1.94	1.85	1.89	0.86	0.85	0.81	1.75	1.74	1.74	6.21	6.15	6.12
Thickness 3	1.05	1.05	1.04	2.06	1.95	1.91	0.98	0.94	1.12	2.04	2.18	2.07	1.05	0.97	0.94	1.95	1.84	1.92	0.89	0.83	0.76	1.7	1.72	1.73	6.21	6.15	6.13
Initial wet mass (no hole) - oz

Test Stand

Setting up thermocouples

...

Versions Compared