...
Below is a table showing the results of the thermal tests. Consult the test matrix above to see what each "series" corresponds to (for example, "Series 1" means 1/4" phenolic sheet). All samples measured 2" x 2" in area. For a more detailed spreadsheet containing all of the results, consult the attached Excel spreadsheet. (ATTACH SPREADSHEET)
*PM = phenolic microballoons
**This is the sample after all the coatings (if relevant) have been applied, after the hole was drilled in the sample (hole needed to attach sample to test stand).
| Series 1 | Series 2 | Series 3 | Series 4 | Series 5 | Series 6 | Series 7 | Series 8 | Series 9 | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trial | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 | 1 | 2 | 3 |
| Initial mass (plain sample) [oz] | |||||||||||||||||||||||||||
| Initial average thickness [mm] | |||||||||||||||||||||||||||
| Initial mass (sample + paint/PM*) [oz] | |||||||||||||||||||||||||||
| Initial average thickness [mm] | |||||||||||||||||||||||||||
| Initial mass (sample + PM + paint) [oz] | |||||||||||||||||||||||||||
| Initial average thickness [mm] | |||||||||||||||||||||||||||
| Initial mass (prepared sample)** [oz] | |||||||||||||||||||||||||||
| Final mass of sample [oz] | |||||||||||||||||||||||||||
| Final average thickness of sample [mm] | |||||||||||||||||||||||||||
...