Versions Compared

Old Version 5

changes.mady.by.user Umar Padela

Saved on

compared with

New Version 6

changes.mady.by.user Benjamin R Rich

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Requirements:

  •  

    Must withstand the force applied by the piston (60 lbs/bolt, 360 lbs total) [with minimal deformation, less than .1 mm]

  •  

    Must fit within the airframe

  •  

    Must be able to interface with mission package tube and structures below

  •  

    Must be able to interface with piston

...

  1. Waterjet profile
    1. Leave holes slightly undersized
    2. Leave outer diameter slightly oversized
  2. Clean up holes on the drill press
  3. Tap center hole and six surrounding holes
  4. Use piston as a fixture to turn outer diameter to final size
  5. Use piston as a fixture to drill and tap holes on the indexer

TBD - waiting to return to campus

...