Versions Compared

Old Version 18

changes.mady.by.user Unknown User (astrocrg@mit.edu)

Saved on

compared with

New Version 19

changes.mady.by.user Unknown User (janssonm@mit.edu)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Removed reference to using clay--this is unwise as it may hurt hardware.

...

  1. Obtain all required materials and inspect parts for defects.
  2. Using appropriate PPE which includes nitrile gloves and goggles, measure the required amount of Black powder on a scale.
  3. Insert and screw a modified 1/4 NPT plug into one of the two female ends of the 1/4 NPT tee adapter.
  4. Pack the black powder in a "pillow" using Blue Tape and tape it around the Firebolt E-match head. Make sure that the E-match is shorted. you can use some clay to seal it.
  5. Insert and screw the FireBolt into the modified 1/4 NPT plug using Teflon tape, only applying the tape above the slot in the FireBolt. Be sure that the E-match is shorted.
  6. Repeat steps for the other female end of the 1/4 NPT tee adapter.

...