Page History

...

1. Data Type
   1. Temperature
      1. at least 1 under NC tip, at least 4 on surface
      2. at least 2 on the cylindrical walls
      3. Thermocouples must operate at >800K (930 F)
   2. Load
      
      1. Load cells on chutes
      2. Strain gauges on tubes
   3. Accelerometer
      
      1. Pyxida's IMU mounted on payload frame
   4. Vibrations 
      1. Airframe (region near NC)
      2. Piezoelectric based sensor mounted on payload frame
   5. Spine Axial Load Experiment
      1. Fabric sensors or alternative
   6. Fin Deflection (Fin Flutter PT. 2)
      
      1. 1 Camera for each fin, mounted on payload frame
2. Data Rate & Storage
   1. Temperature 10-100Hz
      1. at least 1 under NC tip, at least 4 on surface
      2. at least 2 on the cylindrical walls
   2. Load - 100 Hz
   3. Accelerometer - O(10kHz)
   4. Microphone
   5. Piezos
   6. etc.
3. Hardware Form Factor
   1. Does not affect recovery system deployment
   2. Thermocouple map onto nose cone
      
      1. Interface w/ Structures for NC geometry
   3. Length limit 10"
      1. Set by NC space for 1st-stage only descope
   4. TBD architecture of S2 with IP
4. Operational
   1. 2 hours of on-pad life
      1. Data Storage
      2. Thermal 
      3. Battery life
      4. Acceptable sensor drift
      5. Remote Arming via Pyxida
   2. Relay data to Pyxida
   3. Integration time < 1/2 hour

...