In order to determine which ablatives to use for our nose cone (and as a helpful guide for future purposes), we are setting up a test rig that uses a propane blowtorch to heat small samples of fiberglass.
Below is the test matrix.
| 5-Layer Fiberglass | 10-Layer Fiberglass | |
|---|---|---|
| Control (West Systems epoxy) | ||
| West Systems + Phenolic microballoons | ||
| West Systems + Cork microballoons | ||
| West Systems + High temperature paint | ||
| West Systems + Cotronics 4700 |
Test Stand
<insert pics>
Setting up thermocouples
Samples
Test Procedure:
Testing in blast chamber
Heat for 12 seconds