Duovero Setup

Many instructions here are mirrored from Toby Schneider's instructions at http://gobysoft.org/wiki/InstallOnGumstixOvero.  

Root filesystem preparation

Follow these steps to create a debian wheezy root filesystem.  In this section we will use # host to indicate commands run on the host machine, and # chroot for commands commands run inside the chroot filesystem.  

1. Install dependencies:

   # host
   sudo apt-get install multistrap qemu-user-static

2. Pick a working folder, in this case ~/duovero
 

3. Create a directory to hold the root filesystem:

   # host
   cd ~/duovero
   mkdir rootfs

4. Create a configuration file debian.conf in ~/duovero and paste in the following.  Additional packages can be included here or installed later using apt-get.  

   [General]
   arch=armel
   directory=~/duovero/rootfs
   retainsources=~/duovero/sources
   cleanup=true
   noauth=true
   unpack=true
   bootstrap=Wheezy Net Utils
   aptsources=Wheezy
   
   [Wheezy]
   packages=apt locales udev adduser sudo nano build-essential less
   source=http://debian.lcs.mit.edu/debian
   suite=wheezy
   
   [Net]
   packages=netbase ifupdown iproute net-tools iputils-ping ntp
   source=http://debian.lcs.mit.edu/debian
   
   [Utils]
   packages=wget
   source=http://debian.lcs.mit.edu/debian

5. Run multistrap to create the root filesystem.  

   # host
   multistrap -a armel -d ~/duovero/rootfs -f debian.conf