Hot Wire Cutter

This activity is listed as:

The process  to receive approval for this tool is:

1. Check below to see that your use falls within guidelines
2. Complete, sign, and submit the MIT remote making risk acknowledgement
3. Complete and submit the remote making checklist for this tool
4. If the checklist:
   
   1. Directs you to complete other requirements, do not proceed, we will contact you to discuss
   2. Does not require training or indicate other unfulfilled requirements, you may use the tool

Minimum required PPE and precautions (more may be required based on circumstance)

Most important safety considerations (issues, resources, advice, warnings)

• Use on foams that have been approved for hot cutting in areas with adequate ventilation

  • OK to cut: polystyrene, polyethylene, EVA

  • Not OK to cut: polyurethane, polyisocyanurate

• Adequate ventilation is satisfied if using

  • Outdoors: in a wide open space (not in a shed)

  • Indoors: with an adequate active exhaust system (fume hood, fans, and windows that provide cross flow ventilation);
    Note: DO NOT USE in indoor spaces that may contain flammable materials or flammable residue, such as paint booths or auto garages, even if ventilation is present

• If you must cut indoors, contact us (mit-remote-making@mit.edu) and we can advise on ventilation

Most important considerations in the use of the tool/technology (issues, resources, advice, warnings)

• N/A

Links or info about video/images and complementary or alternative tools/tech to consider

• N/A

Forms and contact information required to obtain approval to use this technology/tools

• Link: remote making risk acknowledgement
• Link: remote making checklist
• Email: Q&A and Discussion to mit-remote-making@mit.edu