11/15:

New Placement:

thermocoupler along axial probe
Pressure sensor on lid and bottom of tank
- Might receive some varying pressure readings due to collisions from fluid, but will level out
  - Useful for comparing pressure readings when collisions happen
- Pressure transducer + impulse line (stainless tube to prevent damage due to temp)
thermal cameras on bottom/top
- Constant processing may be excessive for OBC
- Better to have a pressure sensor on the lid of the tank to measure pressure drops.

Additional consideration:

Omit MLI on outside because the top/bottom needs to be affected by the Sun
- We want to have a similar thermal load as the real tank, which has insulation that is not 100% effective.

OBC:

For constant health checks we will need our own OBC. We need constant updates on the status of the tank for safety and it is unlikely that the satellite we are putting our payload in would want to share that much.

Total Sensors:

Mixing Subsystem Demo

Baffle and Pump Cryogenic Flow Test

Cryocooler Performance Test

Thermal Vacuum Test

Thermal Subsystem Demo

Combined

Space shortcuts