The time rate of change of position.
Mathematical Definition
\begin
[ \vec
= \frac{d\vec{r}}
]\end
1-D Motion with Constant Velocity
The Advantages and the Utility of Constant Velocity
Velocity is a vector. Thus, if an object is moving with constant velocity, it is moving at a constant rate and in a constant direction. For the special case of constant velocity, we can simplify the mathematical definition of velocity to:
\begin
[ v = \frac
] \end
where it is important to note that, although we have removed the arrow over the v, the velocity is still a vector. An object moving with constant velocity is necessarily moving in only one dimension. For the case of one dimensional motion, vectors are not usually written with an arrow.
This special case might seem a bit useless, since it is rare for objects to move purely in a straight line with no change in speed. However, you can often describe a complicated motion with acceptable accuracy by building it out of smaller segments in which the velocity is basically constant.
Utility of the One-Dimensional Case
As with all vector equations, the equations of kinematics are usually approached by separation into components. In this fashion, the equations become three simultaneous one-dimensional equations. Thus, the consideration of motion in one dimension with acceleration can be generalized to the three-dimensional case.
Representing Constant Velocity Graphically
Looking at the equation above, it should be clear that the mathematical definition of constant velocity is equivalent to the formula for the slope of a position versus time graph. To see the utility of this correspondence, consider the following plots:
Consider the left plot. The abscissa is time, and the ordinate is position. This graph is giving the position of some object (called object A) as a function of time. Looking at the graph, we can see that for each second of time that elapses, the object changes its position by 2 meters. This is the same as saying that the slope of the left plot is 2 m / (1 s) or, more simply, 2 m/s. Object A, then, is moving with a speed of 2 m/s.
Contrast that with the middle plot. Object B is only changing its position by 1 meter every second. Thus, it is moving with a speed of 1 m/s.
Finally, look at the plot on the right. Object C is changing its position by 2 meters every second, and so it has a speed of 2 m/s. Note that objects A and C have the same speed. The graphs are different, however, because object C is moving in the negative direction.
That doesn't necessarily mean objects A and C are moving in different actual directions. Recall from lesson 1 that when we are looking at position data, we should always consider what coordinate system applies (does the positive x direction point east? west? north?...), and we haven't determined that for any of the graphs yet.
CheckYourUnderstanding"> Check Your Understanding
Suppose that all three of the plots describe objects moving on the same coordinate system. The positive direction of the system points east, and the negative points west. Try to describe the motions of the three objects in words, based upon what you have learned from the graphs.
Answer: There are many ways to describe the motion, but here are some important features. At the beginning of the motion, A and C are both at the same location, while B is 5 meters east of A and C. A begins moving east at 2 m/s, B begins moving west at 2 m/s and C begins moving east at 1 m/s. By the end of the motion (as plotted) A has caught B (at a position 10 m east of where A and C began). A and B are now 20 meters east of C.