You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Unknown macro: {table}
Unknown macro: {tr}
Unknown macro: {td}
Error formatting macro: live-template: java.lang.NullPointerException
Unknown macro: {td}

Lissajous Figure
from Wikimedia Commons: Image by Peter D Reid

The figures commonly called Lissajous Figures were investigated by Jules Antoine Lissajous in the 1850s, but had earlier been generated and studied by Nathaniel Bowditch of Salem, Massachusetts in 1815, who built a special pendulum to generate them. Later, a Scottish Professor named Hugh Blackborn would create a similar device, which would develop into the "Harmonograph". The figures it generated would become a 19th century craze.

The basic Lissajous figure is made up of two sinusoidal oscillations along directions at right angles to each other, and when the periods of the oscillations along both directions are in whole-number ratio to each other (such as 1:2, or 2:3. The above figure has a ratio of 3:4). The simplest way to achieve this is by using a pendulum whose strings form a "Y" shape. The Lissajous figures are the paths taken by the pendulum bob during its swings, if viewed from directly above or below.

Solution

System:

Interactions:

Model:

Approach:

Diagrammatic Representation

First, consider the Y support for the pendulum:

The pendulum effectively has length L2 when swinging in the horizontal plane in and out of the page, but length L1 along the horizontal direction in the plane of the page.

Mathematical Representation

We ignore the distribution of tensions in the upper cables, and simply view the pendulum as a simple pendulum along either the plane of the drawing or perpendicular to it. In the plane perpendicular to the drawing (where the mass oscillates toward and away from the reader) the pendulum length is L2 and the angular frequency of oscillation is given by the formmula for the Simple Pendulum.

Unknown macro: {latex}

\begin

Unknown macro: {large}

[ \omega_

Unknown macro: {2}

= \sqrt{\frac

Unknown macro: {g}

{L_

Unknown macro: {rm 2}

}} ]\end

Along the plane lying in the page, where the mass moves left and right, the pendulum length is the shorter L1 and the angular frequency is

Unknown macro: {latex}

\begin

Unknown macro: {large}

[ \omega_

Unknown macro: {1}

= \sqrt{\frac

Unknown macro: {g}

{L_

Unknown macro: {rm 1}

}} ]\end

the ratio of frequencies is thus:

Unknown macro: {latex}

\begin

Unknown macro: {large}

[ \frac{\omega_{2}}{\omega_{1}}= \frac{\sqrt{\frac

Unknown macro: {g}

{L_{2}}}}{\sqrt{\frac

{L_{1}}}} = \sqrt{\frac{L_{1}}{L_

Unknown macro: {2}

}} ]\end

in order to have a ratio of 1:2, one thus needs pendulum lengths of ratio 1:4. In order to get a ratio of 3:4 (as in the figure at the top of the page), the lengths must be in the ration 9:16.

Error formatting macro: live-template: java.lang.NullPointerException
  • No labels