An interaction which produces a change in the energy of a system.
Page Contents |
---|
Motivation for Concept
It requires effort to alter the energy of an object, as can clearly be seen when attempting to impart kinetic energy by pushing a car which has stalled or to impart [gravitational potential energy] by lifting a heavy barbell. We would like to quantify what we mean by "effort". It is clear that force alone is not enough to impart energy. Suppose that the car or the barbell is just too heavy to move. Then, for all the pushing or pulling that is done (a considerable force), no energy is imparted. For the energy of a system to change, the system must alter its position or its configuration. In effect, the force must impart or reduce motion of the object to which it is applied.
Mathematical Definition
Work-Kinetic Energy Theorem as Postulate
Suppose that we postulate the Work-Kinetic Energy Theorem for a point particle as the defining relationship of work. Doing so will allow us to find a mathematical definition of work in terms of force.
The relationship between the kinetic energy of a point particle and the work done on the point particle. This theorem is one way to arrive at a mathematical definition of work.Statement of the Theorem
If all the influences on a point particle are represented as works, the net work done by the forces produces a change in the kinetic energy of the particle according to:
![](/confluence/download/export/latex17054507978765471242.png)
Derivation of the Theorem
From Newton's 2nd Law for a point particle, we know
![](/confluence/download/export/latex13536996843260140690.png)
Now suppose that the particle undergoes an infinitesimal displacement dr. Since we want to bring the left side of the equation into line with the form of the expression for work, we take the dot product of each side with the displacement:
![](/confluence/download/export/latex15539202294872299964.png)
Before we can integrate, we make a substitution. Since v is the velocity of the particle, we can re-express the infinitesimal displacement as:
![](/confluence/download/export/latex13648750776613163529.png)
Making this substitution on the right hand side of the equation, we have:
![](/confluence/download/export/latex8808059617964926550.png)
We can now integrate over the path:
![](/confluence/download/export/latex3413003054076742615.png)
which is equivalent to the Work-Kinetic Energy Theorem.
Definition of Work
By comparing the derivation of the theorem to its statement, we see that in order for the theorem to be satisfied, we must make the definition:
\begin
[ W_
= \int_
\vec
_
\cdot d\vec
]\end
which leads us to define the work done by an individual force as:
\begin
[ W = \int_
\vec
\cdot d\vec
]\end
Importance of Path
Conservative Forces treated as Potential Energy
The form of our definition of work involves a path integral. For some forces, however, the value of the path integral is determined solely by its endpoints. Such forces are, by definition, conservative forces. This path-independence is the property which allows us to consistently define a potential energy to associate with the force. Thus, the work done by conservative forces will usually be ignored, since their interaction is instead expressed as a contribution to the mechanical energy of the system. The two commonly considered conservative forces in introductory mechanics are:
- [gravity]
- [spring forces]
Non-Conservative Forces
Common forces in introductory physics whose effects are usually path dependent are:
For these forces, it is not possible to define a useful potential energy, and so the path of the system must be understood in order to compute the work when energy is used to describe a system subject to these interactions.
Example of Friction
To see the dependence of non-conservative work on path, consider a box of mass m moving along a rough, level surface. Suppose the box is subject only to horizontal applied forces, gravity, normal force and kinetic friction as it moves. Suppose the box is moved in one dimension from position xi directly to position xf as shown in the figure below.
Unable to render embedded object: File (work1stage.png) not found.
If we assume that the coefficient of kinetic friction is a constant μk, we can find an expression for the work done by friction in the course of this movement. The friction force will be:
\begin
[ F_
= \mu_
N]\end
where N is the normal force on the box from the floor. However, since the box is only moving horizontally (meaning ay is zero) and the only vertical forces are gravity and the normal force, we can draw the free body diagram below.
Unable to render embedded object: File (workfbd.png) not found.
The diagram implies we can write Newton's 2nd Law for the y direction as:
\begin
[ N-mg = ma_
= 0]\end
This tells us that the normal force is equal in magnitude to the box's weight and so the force of friction has the constant magnitude:
\begin
[ F_
=\mu_
mg]\end
Further, since friction is always opposite to the motion, and the motion is always in the + x direction, we can write:
\begin
[ \vec
_
= -\mu_
mg\hat
]\end
and:
\begin
[ d\vec
= dx\hat
]\end
Thus, our path integral is reduced to a one-dimensional integral of the form:
\begin
[ W = \int_{x_{i}}^{x_{f}} (-\mu_
mg)\;dx = -\mu_
mg(x_
-x_
)]\end
which seems to depend only upon the endpoints. Consider, however, the alternate path between the same endpoints xi and xf shown here:
Unable to render embedded object: File (work3stage.png) not found.
This path has the box first making the trip from the position xi to a position xm between the initial and final positions of the box, then returning to the initial position xi and then completing the trip to the final position xf. Again, the box is assumed to be subject to purely horizontal applied forces, so that the friction force has a constant magnitude of:
\begin
[F_
= \mu_
mg]\end
To evaluate the path integral for the work, we must break the path up into three parts which consist of motion in one direction only. The parts coincide with the stages labeled 1 through 3 in the figure above. In each stage, we must determine the vector form of the friction force.
The same splitting of the path is needed for the computation of the distance traveled in kinematics.
\begin
[ \mbox
\vec
_
= - \mu_
mg\hat
]
[ \mbox
\vec
_
= + \mu_
mg\hat
]
[ \mbox
\vec
_
= - \mu_
mg\hat
]\end
It is important to ensure that the friction force vector always points in the direction opposite the motion.
We can now write the path integral for the work, using the fact that all motion is in the x direction:
\begin
[ W = \int_{x_{i}}^{x_{m}} (-\mu_
mg)\;dx + \int_{x_{m}}^{x_{i}} \mu_
mg\;dx + \int_{x_{i}}^{x_{f}}(-\mu_
mg)\;dx]\end
Note that although the box is moving in the --x direction in the middle part of the path integral, the differential dx remains positive. The sign of the motion is encoded in the endpoints of the integral. The lower limit of the integration is a larger x value than the upper limit, implying that the box is moving in the --x direction.
For a conservative force such as gravity, there would be no sign flip in the middle term, so that the sum of the first two integrals would be zero, and the integration would simply be from xi to xf, giving dependence only on the endpoints of the path.
The result of the integrations is:
\begin
[ W = -\mu_
mg (x_
-x_
+ x_
- x_
+ x_
- x_
) = -\mu_
mg(2(x_
-x_
) + (x_
-x_
)) = -\mu_
mgd ]\end
where d is the total distance (not displacement) traveled by the box. Since distance depends on the path (it is not a function of the endpoints only) we see that the exact path traveled by the box is important.