Test Session 1

The first phase of testing was performed September 30, 2017. This was done in the blast chamber in the basement of Building 37. ~8 people showed up to help. Our goal was to simply test whether we could make a Tender Descender "pop". We measured out 0.2 grams of black powder and set up the wiring using the long spool of wire which is often used for ground tests. We found that we were unable to trigger the E-match. We switched to using a short (~25 feet) extension cord (meant for 120 VAC) as our trigger wire. This allowed the E-match to fire. For future tests, we need to either use short wires, or use more-capable batteries. A LiPo battery would need to be completely charged for us to be confident in its ability to trigger the E-match through the long wire.

Once we swapped the wiring, we were able to activate the Tender Descender. We had four FireBolts made beforehand, and had just consumed one. We decided to replicate our first test with 0.2 grams of black powder. The best scale we had was 0.1 grams of precision, which we found was not really sufficient to measure things out accurately. We tried lowering the charge to 0.1 grams, but it seemed like it was just as volumetrically full inside the "cup" of the Tender Descender, and upon triggering seemed like it may have even been more energetic than the 0.2 gram tests. For the final test, we decided to forgo the scale. We used a popsicle stick to pull one "scoop" out of the canister of black powder, to see if this minimal amount would be enough to fire the separation. We found that it was indeed successful. This indicates to us that even a small charge can activate the Tender Descender, and that our larger charges will not be "borderline" in ability to fire.