...
Time kept at 240 F: 10:00
Data:
Conclusions:
DAQ survived test, recorded data onto SD card with minimal noise. Thermocouples feel secure after test.
Oven Temperature Tracking:
5:30 -> ~130 F
15.03 Oven reaches 240 F (test for 10 mins holding tempature at ~240 F (+/- 2 F)
16.03-> ~240 F for a duration of 10 mins
Test 2:
Setup:
Battery Voltage: 3.7 V
Time kept at 240 F:
Data:
Conclusions:
Notes
3/13/2019 (Diane, Miske, Juan):
...
3/16/2019 (Diane, Miske, Juan, Shreeyam):
- Used four (4) masonry blocks to support NC in oven
- Used normal PVC insulation wire for power, route through thermocouple inlet
- Mounted daq with Kapton tape on a masonry block
- Created a NC template of the top and base of the NC by marking a trace on the insulation
- Added Kaowool (ceramic based) insulation inside the base and top of the NC prior to oven insertion
- Discussed preheating oven to 257 F (125 C) before powering on
3/20/2019 (Diane, Miske, Juan, Shreeyam):
- Decided to record data during preheating anyways for possible reference against mysterious data collection
- Tagged thermocouples to match to attachment points in NC
- Thermocouple Labeling
- TC1 = White Dashed, TC2 = White Solid, TC3 = Black Dashed, TC4 = Black Solid, TC5 = Gold Dashed, TC6 = Gold Solid