Page History

On a Linux server, the quickest way to get started is to copy the following files from the Touchstone locker (/mit/touchstone/config/shibboleth2-sp) into /etc/shibboleth:

• attribute-map.xml
• gen-shib2.sh
• shibboleth2.xml.in

Note: If you do not have AFS installed on your server, then you can access the above files via http, either from a browser or using wget. The URL is http://web.mit.edu/touchstone/config/shibboleth2-sp/

Then run the gen-shib2.sh script, and answer the prompts, to generate shibboleth2.xml. For example:

# cd /etc/shibboleth
# cp /mit/touchstone/config/shibboleth2-sp/* .
# sh gen-shib2.sh

Note that any changes to the shibboleth2.xml, attribute-map.xml, and attribute-policy.xml files will be detected automatically, i.e. without requiring a restart of shibd.

Note: The gen-shib2.sh procedure described above is currently supported only on Linux and Solaris systems only; it should be portable to other UNIX-based systems with minimal effort. Please contact touchstone-support if you are using another operating system and having problems with the gen-shib2.sh script.

The $prefix/etc/shibboleth directory will contain apache.config, apache2.config, and apache22.config, which contain needed and example directives for Apache 1.3, Apache 2.0, and Apache 2.2, respectively; copy and/or include the appropriate file in your Apache config, and customize as needed.

The directory also contains a shibd init script for Red Hat (shibd-redhat) and Debian (shibd-debian) systems. The current Red Hat RPMs also install the init script into /etc/init.d/shibd, and adds it as a managed service.

On Solaris machines, the gen-shib.sh script will generate a shibd init script (from shibd.in); this should be installed into /etc/init.d, and configured to start at boot time, after httpd has started.

NOTE: shibd is a daemon that must be running, so make sure it is started at boot time, after Apache httpd has been started.

On Windows/IIS machines, the shibboleth2.xml.windows-example file in the locker is a good starting point for the shibboleth2.xml file. You will need to edit the file for it to work on your server; please see the comments at the top of the file for the details. The attribute-map.xml file in the locker should work without modification.