Design Requirements
- Diameter less than 5.54 in
- Can hold a volume of 80 cubic inches
Prototype Designs **Sketches to be attached later
- Rectangular Prism with 2 Flaps
- Notes: This design was the easiest to sew. Some modifications to be added: add 2 more rectangular Flaps, add depth to the line-holding pocket (1/4 inch)
- Notes: This design was the easiest to sew. Some modifications to be added: add 2 more rectangular Flaps, add depth to the line-holding pocket (1/4 inch)
- Cylindrical with with 2 Semi-Circle Flaps
- Notes: Design included a pocket with depth, with two Velcro closures. Some modifications to be added: two locking loops must be placed on the sides of the bag and the location of these loops must not interfere with the pocket.
- Notes: Design included a pocket with depth, with two Velcro closures. Some modifications to be added: two locking loops must be placed on the sides of the bag and the location of these loops must not interfere with the pocket.
- Cylindrical with Pinch Closure
- Notes: The lines already had a built-in space for their storage, without the extra flaps that the main bag was constructed to have. However, the design also was not the most enclosed bag, as the flaps somewhat did not meet perfectly due to the warping of the bag's shape as it pinched closed.
Testing
All three designs were piston-tested. Design 2 failed twice, while both Design 1 and 3 deployed successfully.
January 20, 2019 Piston-Drogue Testing
Final Decision on Drogue Design/ Modifications
We decided on a rectangular prism design with a line-holding pocket.
Dimensions: **
Final Notes:
It is extremely difficult to sew around the tapes, especially at the corners of the square base. Perhaps a circular bottom ends up being easier to sew.