Overview
This part completes the forward end of the motor pressure vessel, and provides mounting features for the booster recovery system and LE DAQ pressure transducer. The part was modified from Hermes 2 to accommodate a rope guide to replace the load cell as a recovery attachment point.
Drawing
Manufacturing Instances
| Serial Number | Comments | Outcome | ME |
|---|---|---|---|
| 4 | Inner bowl was machined on a lathe, resulting in missing the quarter inch fillet around the outside of the bowl as well as unsatisfactory surface finish | Scrap | Israel Bonilla |
| 5 | Outer feature formed on lathe, machined 0.01" under listed dimension for case fitment. Pocked machined on mill, satisfactory results. | Flight Hardware | Israel Bonilla |
MT001-5 pocket being roughed out on mill using 1/2" flat endmill at 0.2" ADOC and 0.25" RDOC