Part | Component Status | Responsible Engineers |
|---|---|---|
| Booster Cup | Manufacturing Prep | Diego D. 2024, Christina N. 2024 |
| Sustainer Cup | Manufacturing Prep | Diego D. 2024, Christina N. 2024 |
Design
Requirements:
- Shall contain soft goods prior to separation
- Shall withstand separation loads
- Shall separate from the nose cone/staging cone
Material: Fiberglass coupler tube
Risks: Holes shear during separation (insert link to past issues)
Features:
- Radial holes for interfacing with the diaphragm
Analysis
N/A
Manufacturing
Operations:
- Cut coupler tube to length on the horizontal bandsaw
- Sand faces to level
- Cut a piece of supporting material to go inside the cup while machining it
- Add holes with radial indexer
- Sand interior and exterior until slides smoothly into mission package tube