You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Current »

The iLab Project
 

  About  

  iLabs  

  Partners  

  Educators  

  Developers  

  References  

  Calendar  

  Help  

Polymer Crystalization

The Polymer Crystallization experiment involves heating a polymer, the Polyethylene Oxide (a.k.a. PEO), above its melting point and then let it cool down to several controlled temperatures (where it crystallizes), in order to draw conclusions about the characteristics of the PEO crystal formation. The crystals are observed using a very expensive polarized light microscope. The polymer Crystallization experiment is memoryless, in the sense that it can be repeated over and over using the same polymer sample, without affecting future experiment runs.

The laboratory uses 3 hardware devices to allow students execute the experiment. The use of these devices follows naturally from the purpose of the experiment. First, the Zeiss Axioplan2 polarized light microscope is used to observe the polymer sample at all stages of the experiment. Second, the Linkam LTS heating stage heats the sample up to the desired temperature. Finally, the Zeiss Axiocam camera (fixed on top of the microscope) captures the images observed from the sample.

Resources

Below is some information about the Polymer Lab.

  • Assignments - Assignments handed out for the polymer lab
    • Polymer assignment  PDF

  • Papers and Theses - about the polymer Lab
    • Derik Pridmore Thesis - Online Polymer Crystallization Experiment PDF
    • Daniel Talavera Thesis - Online Polymer Crystallization Lab PDF

  • Documentation
    • Polymer overview  PPT
    • Polymer iLab Overview DOC
  • No labels