You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

  1. Materials: need DP-420 NS Epoxy for fillets and System 4000/4600 Hardener
  2. Fin Manufacturing
    1. Waterjet G-10 Cores
    2. 5 Carbon fiber layups and sanding
    3. Leading edge 
      1. emphasis on symmetry 
      3. Sanding board at angle is constrained by the 2 x 4s, fin is slowly slid in with different holders for each leading edge. 
      4. need to calculate geometry for a defined inner angle
    4. Alignment Jigs
    5. Jig for fiberglass layups
  • No labels