Unknown macro: {table}
Unknown macro: {tr}
Unknown macro: {td} [Examples from Rotation]
Unknown macro: {tr}
Unknown macro: {td}
The root page Examples from Rotation could not be found in space Modeling Applied to Problem Solving.
Unknown macro: {search-box}
Consider a ball placed on a ramp inclined at θ = 30° above the horizontal.
Part A
What is the acceleration of the ball's center of mass as it rolls down the ramp? Assume that the ball rolls without slipping.
Solution
We consider two methods.
Method 1
System:
The ball is treated as a rigid body.
Interactions:
External influences from the earth (gravity) and the ramp (friction and normal force).
Model:
[Rotation and Translation of a Rigid Body]
Approach:
Diagrammatic Representation
The ball will translate and rotate as it rolls down the slope. The relevant free body diagram is shown below.
Mathematical Representation
From this free body diagram we can construct Newton's 2nd Law for the ball's center of mass and also the angular version of Newton's 2nd Law for rotations of the ball about the center of mass. The x-component of Newton's 2nd Law is:
Unknown macro: {latex} \begin
Unknown macro: {large} [\sum F_
Unknown macro: {x} = mg \sin\theta - F_
Unknown macro: {f}
= ma_
] \end
and the sum of torques about the center of mass is:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \sum \tau = RF_
Unknown macro: {f}
= I\alpha ] \end
We can eliminate the friction force from the two equations to find:
Unknown macro: {latex} \begin
Unknown macro: {large} [ mg \sin \theta = ma_
Unknown macro: {x}
+ I\frac
Unknown macro: {alpha}
Unknown macro: {R}
] \end
Now, because the ball is rolling without slipping, we can relate the angular acceleration to the linear acceleration of the center of mass:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \alpha R = a_
Unknown macro: {x}
] \end
Substituting this expression allows us to express the acceleration as:
Unknown macro: {latex} \begin
Unknown macro: {large} [ a = \frac
Unknown macro: {g sintheta}
{1 + \frac
Unknown macro: {displaystyle I}
{\displaystyle mR^
Unknown macro: {2}
}} ]\end
Using the result that the moment of inertia for a sphere is 2/5 m R2, we have:
Unknown macro: {latex} \begin
Unknown macro: {large} [ a =\frac
Unknown macro: {g sintheta}
{1+\frac
Unknown macro: {displaystyle 2}
{\displaystyle 5}} = \frac{5 g \sin(30^
Unknown macro: {circ}
)}
Unknown macro: {7}
= \mbox
Unknown macro: {3.5 m/s}
]\end
Method 2
System:
The ball as a rigid body.
Interactions:
External influences from the earth (gravity) and the ramp (normal force and friction).
Model:
[1-D Angular Momentum and Torque].
Approach:
Diagrammatic Representation
Instead of writing separate Laws for the translation and rotation, we could instead choose to simply consider the movement as angular momentum about a fixed axis. Since the friction force is unknown, it is best to choose an axis on the surface of the ramp such as the one shown in the picture below.
Mathematical Represenation
The torques about this axis will depend upon the position of the ball. When the ball has moved a distance x along the ramp, the torques from gravity and the normal force will be:
Unknown macro: {latex} \begin
Unknown macro: {large} [\sum \tau = mg(x\cos\theta+R \sin \theta) - Nx ] \end
But, using the fact that the ball is not tranlating in the y-direction, we can derive the standard inclined plane relation:
Unknown macro: {latex} \begin
Unknown macro: {large} [ N = mg\cos\theta]\end
which gives:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \sum \tau = mgR \sin \theta ] \end
We must now find an expression for the angular momentum of the ball. Even though we have not chosen to write separate dynamical equations for the rotation about the center of mass and the translation, the ball's angular momentum will still be composed of these two parts:
Unknown macro: {latex} \begin
Unknown macro: {large} [ L = I_
Unknown macro: {rm cm} \omega_
+ \vec
Unknown macro: {r}
_
Unknown macro: {rm cm,axis}
\times m \vec
Unknown macro: {v}
_
Unknown macro: {rm cm} = I_
\omega_
Unknown macro: {rm cm} + m v_
R ]\end
Because the ball rolls without slipping, we can relate the angular speed about the center of mass axis to the translational speed of the center of mass:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \omega_
Unknown macro: {rm cm} R = v_
] \end
Substituting gives:
Unknown macro: {latex} \begin
Unknown macro: {large} [ L = I_
Unknown macro: {rm cm} \frac{v_{\rm cm}}
Unknown macro: {R}
+ mv_
R ] \end
We now set the time derivative of the angular momentum equal to the sum of the torques, giving:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \left(\frac{I_{\rm cm}}
Unknown macro: {R}
+ mR\right)a = mgR\sin\theta ] \end
so that we find:
Unknown macro: {latex} \begin
Unknown macro: {large} [ a = \frac
Unknown macro: {gsintheta}
{1 + \frac
Unknown macro: {displaystyle I}
{\displaystyle mR^
Unknown macro: {2}
}} ] \end
deck: com.atlassian.confluence.macro.MacroExecutionException: java.lang.NullPointerException
Part B
Assuming the ball is released from rest, what is the speed of the ball's center of mass after it has moved 1.3 m along the ramp?
Solution
Once again, we solve the problem using two different methods.
Method 1
System, Interactions and Models:
As in Part A, plus One-Dimensional Motion with Constant Acceleration.
Approach:
After using one of the methods described in Part A to determine the acceleration, we can use kinematics to find the speed. The most direct approach is to use:
Unknown macro: {latex} \begin
Unknown macro: {large} [ v_
Unknown macro: {x} ^
Unknown macro: {2} = v_{x,{\rm i}}^
+ 2 a_
(x-x_
Unknown macro: {rm i}
) ]\end
where we choose xi = 0 m. Solving gives:
Unknown macro: {latex} \begin
Unknown macro: {large} [ v_
Unknown macro: {x} = \pm \sqrt{2a_
x } = \pm \sqrt{\frac
Unknown macro: {2gxsintheta}
{1+\frac
Unknown macro: {displaystyle I}
{\displaystyle mR^{2}}}} ] \end
we choose the plus sign, since the ball is translating in the + x direction. Since the y-velocity is zero, the total speed of the ball's center of mass is:
Unknown macro: {latex} \begin
Unknown macro: {large} [ v = \mbox
Unknown macro: {3.0 m/s}
] \end
Method 2
System:
The ball plus the earth and ramp.
Interactions:
There are internal gravity, normal and friction forces. Gravity is conservative, while the normal force and friction are non-conservative.
Model:
[Mechanical Energy and Non-Conservative Work].
Approach:
Another way to solve the problem is to use energy. It turns out that in this problem, the mechanical energy of the ball will be constant. This assertion requires justification. The forces present in the system are gravity, normal force and friction. Gravity is a conservative force. The normal force is non-conservative, but it does no work because it is perpendicular to the motion of the object. Friction, however, is both non-conservative and directed anti-parallel to the motion of the ball, and so it should clearly do work. The reason we can assume the energy is constant is the problem's statement that the ball rolls without slipping. This means that the friction is static rather than kinetic. Kinetic friction converts mechanical energy into thermal energy and so it is not appropriate to use conservation of mechanical energy when kinetic friction is present. The work done by static friction, however, does not convert mechanical energy into thermal energy. Instead, the static friction acts to divert some of the lost potential energy into rotational kinetic energy (rather than simply translational kinetic energy). Thus, all of the energy remains in a mechanical form.
With this realization, we can write the equation of mechanical energy conservation in the form:
Unknown macro: {latex} \begin
Unknown macro: {large} [ K_
Unknown macro: {rm f}
+ K_
Unknown macro: {rm rot,f}
+ U_
Unknown macro: {rm g,f}
= K_
Unknown macro: {rm i}
+ K_
Unknown macro: {rm rot,i}
+ U_
Unknown macro: {rm g,i}
]\end
If we select h = 0 at the point of release of the ball, then by the time the ball has moved a distance x along the ramp, it has reached a height:
Unknown macro: {latex} \begin
Unknown macro: {large} [ h = - x \sin\theta]\end
Substituting zeros and appropriate expressions into the conservation of energy formula gives:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \frac
Unknown macro: {1} Unknown macro: {2} mv_
Unknown macro: {f}
^
+ \frac
Unknown macro: {2} I\omega_
Unknown macro: {f}
^
- mgx\sin\theta = 0 ] \end
Finally, the assumption that the ball is rolling without slipping implies the relationship:
Unknown macro: {latex} \begin
Unknown macro: {large} [ \omega_
Unknown macro: {f} R = v_
]\end
so:
Unknown macro: {latex} \begin
Unknown macro: {large} [ v_
Unknown macro: {f}
= \sqrt{\frac
Unknown macro: {2gxsintheta}
{1+\frac
Unknown macro: {displaystyle I}
{\displaystyle mR^{2}}}} ] \end
deck: com.atlassian.confluence.macro.MacroExecutionException: java.lang.NullPointerException
deck: com.atlassian.confluence.macro.MacroExecutionException: java.lang.NullPointerException
