You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 46 Next »

The definitions given here are intentionally succinct and focus on the modeling physics perspective.

  • accelerationThe time rate of change of velocity of an object, or alternately the net force on the object divided by the object's mass.
  • amplitudeThe magnitude of the maximum displacement from the rest position of an oscillating system.
  • angular accelerationThe rate of change of the angular velocity with time, or the second derivative of the angular position with respect to time. For systems rotating about a single axis with a fixed moment of inertia about that axis, the angular acceleration is directly proportional to the net torque acting on the system.
  • angular frequencyThe magnitude of the angular velocity vector, ω. An angular frequency can also be defined for periodic linear motions like Simple Harmonic Motion by multiplying the ordinary frequency f by 2π (ω = 2πf).
  • angular impulsethe angular impulse is the integral of torque (single-axis) over the time it acts.
  • angular momentum about a single axisThe circulation of linear momentum about the specified axis, being proportional to the component of momentum or each mass along a circle about the axis and the radius of the circle. Angular momentum is changed by external torques, and therefore is constant when these sum to zero. The angular momentum of a rigid body is proportional to its moment of inertia times its angular velocity.
  • angular positionThe angular coordinate of a location in polar coordinates, generally represented by the small Greek letter theta, θ .
  • angular velocityThe change in angular position with time, the angular analogue of linear velocity. It is a vector, having both magnitude and direction. In introductory mechanics we will almost always deal with cases of angular velocity about a single axis of rotation, so that the angular velocity is confined to one dimension.
  • axis of rotationAn imaginary line chosen by the problem solver that is perpendicular to the plane of motion of a system and about which angular momenta and torques are calculated.
  • center of massThe average position of the mass in a body or system.  A system will behave in response to external forces applied to any of its parts as if the entire mass of the body were concentrated there.  The motion of the center of mass is unaffected by internal forces in the system (e.g. forces between the atoms, or collisions between different components of the system).
  • centripetal accelerationThe acceleration directed toward the center of rotation that results from the change in direction (not magnitude) of the velocity when an object is in circular motion.
  • coefficient of frictionActually two different, but related, constants of proportionality, relating frictional force to the associated normal force
  • conservative forceA force which has an associated potential energy. In introductory mechanics, the only conservative forces generally encountered are gravitation (universal) and elastic forces which satisfy Hooke's Law for elastic interactions.
  • conservedA quantity that is constant in time (does not change) is said to be conserved.
  • coordinate systemA set of mathematical axes which serve as a quantitative map grid, allowing precise specification of positions of objects.  Cartesian coordinates are most common in introductory mechanics, but cylindrical coordinates are sometimes useful, especially for circular or orbital motion.
  • cross productAlso known as the vector product, the cross product is a way of multiplying two vectors to yield another vector.
  • decompositionDecomposing a problem into parts, each amenable to solution using the S.I.M. approach.
  • Delta-v diagramA graphical approach to understanding the form of the centripetal acceleration.
  • displacementchange in position of an object from a fixed reference point.
  • distancedistance is a scalar measurement of the change in location of something from a fixed reference point. It differs from the displacement, which is a vector measurement of the change in location.
  • dot productA common term for the scalar product, since the scalar product is symbolically indicated by placing a dot between the two vectors being multiplied
  • dynamicsThe branch of mechanics that is the study of the interplay between the applied forces on a mechanical body and the resulting motion.
  • elastic collisionA collision in which the momentum and kinetic energy of the system consisting of all objects participating in the collision remains constant.
  • elementary fermionic particleThought to be the building blocks of all matter, the fermionic particles currently believed to be elementary (indivisible) are quarks and leptons.
  • environmentThe things that can interact with a system and influence its behavior, but which are not directly part of the system and are not modeled.
  • equilibrium positionA stable position in which all forces are balanced (vector sum is zero) and the object of interest is not in motion.  Equilibria may be stable or unstable depending on whether the force acts back toward or away from the equilibrium position if the particle is slightly displaced from in.
  • experimentCareful observations of constructed situations that have the ability to falsify Laws, measure parameters of the laws, or properties of physical objects.
  • external forceA force exerted on a constituent of a system by the environment.
  • fixed axisA situation in which the axis of rotation is physically constrained to be in a set location relative to the moving parts, usually because it is fabricated as an axle.
  • forceForce produces a change in the momentum of a mass on which it acts, according to F=ma (Newton's Second Law). Forces result from various types of physical interactions, which always generate a pair of opposite forces acting on two different objects (Newton's Third Law).
  • force diagrama schematic drawing showing the object under consideration (often represented as a point mass) and the forces acting upon it. the forces are represented as vectors and are labeled.
  • free body diagramA graphical representation used to analyze the forces exerted on a single system by its environment.
  • freefallAn object that is subject only to the force of gravity is in freefall.
  • friction (interaction)
  • fundamental forcesForces which can influence the motion of at least one class of elementary fermionic particle. The only fundamental force which is studied directly in introductory mechanics is gravity.
  • geegee , or g , is a measure of acceleration equal to the acceleration due to gravity (interaction) at the earth's surface.
  • gravity (interaction)
  • gyroscopeA rapidly-spinning symmetrical top usually used to maintain direction or to demonstrate the principles of angular momentum. Often one treats it with the "gyroscopic approximation" which assumes that the angular momentum is parallel to the direction of spin (i.e. the contribution from precession is assumed negligible).
  • impulseThe time integral of force. The net external impulse acting on a system over a given time interval is equal to the system's change in momentum.
  • inertial reference frameA frame of reference with respect to which an object with no real forces acting on it will move with constant velocity, i.e. no acceleration.  Newton's Second Law applies only in inertial reference frames.
  • infinitely massive objectIdeally, an object which is the result of letting the mass approach the limiting value of infinity. In practice, an object whose mass so far exceeds those of any others in the system that its mass may, for practical purposes, be taken as that limiting case.
  • initial-state final-state diagramA diagram illustrating the configuration of the system at the beginning and end of a specified period.
  • interactionWhen one object exerts a force that may change the state of motion (translational or rotational) of another object, those objects are said to interact.
  • internal forceA force exerted on one constituent of a specified system by another constituent of the same system. Internal forces do not affect the momentum of the system's center of mass, because their effects always cancel as required by Newton's Third Law.
  • kinematicsThe branch of Newtonian mechanics that is the study and description of the possible motions of material bodies.
  • kinetic energyThe fundamental manifestation of mechanical energy, kinetic energy is the energy associated with an object's translational and/or rotational motion. Kinetic energy provides the definition of work (and hence all other forms of mechanical energy) through the Work-Kinetic Energy Theorem.
  • line of actionAn infinite line passing through the point of application of a force parallel to the force vector.
  • magnitudeThe length of a vector, or the absolute value of a scalar quantity. The magnitude is always a positive scalar value.
  • massA quantitative measure of the resistance of an object to attempts to change its velocity.   Hence mass is a measure of inertia (from the Latin vis inertia, the force of inaction.) 
  • massless objectAn object that is treated as having no mass.{
  • mass on a springa common physics problem and the archetype of the system for simple harmonic motion
  • mechanical energyThe sum of the kinetic energy and any potential energies of a system.
  • mechanicsThe study of the forces acting on material bodies and the resulting motions, if any.
  • modelIn modeling physics a physical model describes the system, the state of its constituents (including perhaps geometric and temporal structure), their internal and external interactions, and has Laws of Change that determine the changes of state (i.e. behavior).  Models combine the definitions, concepts, procedures, interactions, laws of nature and other relationships that model some aspect of the physical world.  Models intermediate between laws of nature, which are relationships among abstract q
  • moment armAlso called the "lever arm", the moment arm is the distance of closest approach between the line of action of a force and the axis of rotation. It is used to compute the torque produced by the force about the axis of rotation.
  • moment of inertiaA measure of the tendency of an object to maintain its rotational velocity about a specified axis of rotation.  The moment of inertia depends linearly on the mass and quadratically on the distance of that mass from the axis of rotation.  It plays the same role for rotational motion as mass plays for translational motion, being both the ratio of angular momentum to angular velocity and the ratio of torque to resultant angular acceleration, whereas mass is the ratio of (linear) momentum to velocit
  • momentumMass times velocity, or, equivalently, a quantity whose time rate of change is equal to the net force applied to a system.
  • motion diagramA pictorial representation of the motion of an object. it usually takes the form of a one- or two-dimensional plot showing the position of the object at defined times.
  • natural frequencyThe frequency that is characteristic of a given freely oscillating system, with no applied driving force.
  • net forcethe vector sum of all forces acting on an item or system.
  • Newton's First LawIf an object is moving with no force acting upon it, then it will move with constant velocity. Note that velocity is a vector, so this statement implies that the object will keep the same speed and the same direction of motion.  This directly contradicts the animistic view of motion in which the natural condition of a body is at rest with respect to its surroundings - the First Law says the natural state of a body is moving with zero acceleration, not zero velocity.
  • Newton's Second LawThe mathematical relationship between force and momentum, or, for systems with constant mass, the relationship between force and acceleration.
  • Newton's Third LawEvery force exerted on one body by a second body is paired with another force of equal magnitude and opposite direction exerted on the second body by the first.
  • Newtonian mechanicsIn principle, Newtonian Mechanics can be derived from only Newton's Laws (which include ∑F=ma) and the calculus of motion.
  • non-conservative forceA force which does work on an object in a path-dependent manner. For example, any force that has more than one possible value at a specific position is non-conservative.
  • parallel axis theoremA relationship between the moment of inertia of a rigid body about an axis passing through the body's center of mass and the moment of inertia about any parallel axis.
  • pendulumA pendulum is a physical object thatundergoes small angular oscillations under the restoring force of gravity.
  • periodThe length of time it takes for a repeating motion to return to the same place
  • periodic motionMotion which repeats after a fixed period of time, such as harmonic oscillation or orbital motion governed by a central inverse-square law force.
  • phaseA measure of the portion of the period that has passed since a given reference point in a case of periodic motion.
  • phenomenological forcesMacroscopic bodies are composed of huge numbers of elementary particles, which means that the effects of the fundamental forces on macroscopic bodies are complicated by the collective interactions of these particles. As a result, it is often advantageous to construct new force laws to describe the interactions of macroscopic bodies, even though these "new" forces are actually manifestations of the fundamental forces.
  • Physical Model"A physical model (in physics) is a representation of structure in a physical system and/or its properties." [David Hestenes http://modeling.asu.edu].  A physical model will describe the system, the state of its constituents (including geometric and temporal structure), their internal interactions, external interactions, and the changes of state (that is to say, the system's patterns of behavior). 
  • point particleAn object that has no internal structure, and no physical size. Also commonly called a point mass.
  • positionA vector with dimensions of length giving the displacement of an object from the origin of a specified coordinate system.
  • position versus time graphA plot of position as a function of time is an often useful diagrammatic representation of kinematics problems.
  • potential energyA form of energy associated with the presence of conservative interactions such as gravity or a spring.
  • powerThe time rate of doing Work.
  • precessionThe slow rotation of the symmetry axis (which is also the axis of rotation) of a rapidly spinning symmetric object.
  • problem
  • projectileAn object that is hurled ( projected ) with force on a trajectory, but with no further force applied after that initial impulse.
  • pure rotationA physical situation in which the only motion is rotation about a well-defined center of rotation, with no translational motion or storage of potential energy.
  • quantity of motionNewton's archaic term for the quantity now known as momentum.
  • radiansA unit of angular measure. There are 2π radians in a full circle or a full rotation.
  • restoring forceA force directed opposite the displacement of a mass from some equilibrium position that acts to restore the mass to the equilibrium location. The most commonly analyzed case is a restoring force which has a magnitude linearly proportional to the displacement from equilibrium, leading to Simple Harmonic Motion.
  • right-handed coordinate systema coordinate system consisting of three mutually perpendicular axes, x , y , and z , in which the z -axis follows the "right hand rule" as the direction of the cross product of axes x and y .
  • rigid bodyAn extended object which does not change shape.
  • rolling without slippingA common assumption in problems of rotation, angular momentum, and torque, and one commonly encountered in reality. A rotating object, usually circular, rolls against another object (very often a flat surface) without any slipping between the rim of the object and the object or surface it is rolling against.
  • rotational kinetic energyThe kinetic energy associated with uniform rotation of a rigid body about an axis.
  • scalarA quantity that does not have a direction associated with it.
  • scalar productAlso called the dot product, the scalar product is a special method of multiplying two vectors that gives as a result a scalar (that is, a quantity with magnitude but no direction).
  • significant figuresThe non-zero individual digits ( figures ) in a number that are of importance and essential to convey the value and the precision needed or measured.
  • sinusoidal functionSine, cosine or a linear combination of sine and cosine with arbitrary constant coefficients.
  • small angle approximationwhen the angle is small, and expressed in radians, then we may approximate sin(θ) by θ.
  • speedSpeed is the magnitude of the velocity vector, and is therefore the scalar value corresponding to the velocity, regardless of direction (and always a positive quantity)
  • staticsThe branch of mechanics which is the study of systems of forces acting on bodies which are not in motion.
  • Strategic Knowedge
  • systemThe object or the group of objects whose motion is being described using a model.
  • system constituentA distinct object within the system being considered.
  • tangential accelerationThe component of an object's total acceleration directed tangential to the path of the object's motion. The tangential component of the acceleration changes the object's speed, but does not affect the object's direction of motion.
  • tensionThe force exerted by a string, rope, tape, or other flexible object.
  • torque (single-axis)An interaction which has the potential to produce a change in the rotational velocity of a system about a specified axis.
  • totally inelastic collisionDuring the course of the collision the colliding objects become attached to form a single rigid body. (Also often called a perfectly or a completely inelastic collision.)
  • vectorA physical quantity that has both magnitude and direction.
  • velocityThe time rate of change of position.
  • weightThe force of gravity on an object near the earth's surface (or the surface of some other planet).
  • workAn interaction which produces a change in the mechanical energy of a system, or the integrated scalar product of force and displacement.
  • Work-Kinetic Energy TheoremThe relationship between the kinetic energy of a point particle and the work done on the point particle. This theorem is one way to arrive at a mathematical definition of work.


  • No labels